Editing 14004 Floatel


== General ==

*yard budget for developing and building 1st hull €35.000 (Floating 44 was €20.000, Comforship was €40.000 (done by Michiel van Vossen))
*Material - aluminum
*CE Category C (required by marina's)
*floating hotel room, will never leave it's berth after mooring
*Hull - as cheap as possbile to produce (combination of smart engineering, material reduction and labor reduction)
*Floating 44 (project 13006):
**displacement 14 tons
**floating at DWL
**trim aft 40mm
**transverse cross stiffeners removed
**see dwg P:\Offers\14004 Houseboat\Final draw


== Scope ==
*NA/calculations (total 128h)
**hydrostatics/weight estimation(interpolation/construction) (40h)
**intact stability (16h)
**damaged stability (32h)
**roof strength (24h)
**glass thickness (8h)
**frame strength (8h)
*ME (total 132h)
**building kit (120h)
**additional construction details (12h)

===Additional===
*7 superstructure frames (5 onder, 2 boven)
*hatch hull
*NO railing
*NO stairs interior
*NO stairs exterior
*NO 'kraaiennest'
*bridge connection
*calculate influence of filled whirlpool on heel

==Meeting notes==
*Peter will inform if boat needs to be sailing or not for CE approval
*BOA 4980mm for roadtransport (including wooden sideplanking)
*sceptic tank [http://www.afmitech.com/products/bever-combi-compact-buoyant Afmitech Bever Combi Compact]
**contact person Jan Boede de Jong 
**tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible
**bench and bathing platform to be removable for this purpose
**hull fixtures by Navyk
*insulated and heated drain hose for whirlpool Ø80mm
*Dual Docker removable mounting plates by Navyk
*removable cleats by Navyk (see pictures)
*wooden planking
**Lariks 28mm
**beams H60mm
*bathing area in front of bench
**alu grills on alu structure
**grills tbd by Linskens
===hull construction===
*bended sheets 3x2m
*on top 21mm wide flanges
*bottom slightly rounded for additional stifness (10mm)
*bow
**rectangular in planview
**sloped in sideview
*all tubes rectangular 120x60
*cut out in tubes for draining rainwater from deck
*70mm distance between platform beams and deck
*NO double transom (Floating 44)
*technical space
**in SB hull
**access hatch CO 500x500
**space position by Niels
*pipe through hull in way of whirlpool for drainpipe?
*bridge connection
*top of wooden planking in line with interior sole

===house===
*roof of sandwich panel (Kingspan Unidek):
**faces 12mm chipboard P5 or P7
**ESP core, thickness as desired
**wooden ribs (pine), width as desired
**wooden ribs at 450 COC (can probably be customized too)
**maximum panel length 8500
**beams are in longitudinal direction
*side walls
*load for strength calculation to be determined by Linskens


[[Category: Projects]]