Difference between revisions of "Naming convention"
From NavykI
Navykisysop (talk | contribs) |
|||
| Line 1: | Line 1: | ||
| − | + | ==ShipConstructor Hull== | |
EXPANSION DRAWINGS | EXPANSION DRAWINGS | ||
| Line 29: | Line 29: | ||
**SUPERSTRUCTURE | **SUPERSTRUCTURE | ||
| − | + | ==ShipConstructor Structure== | |
PLANAR GROUP NAMES | PLANAR GROUP NAMES | ||
Revision as of 14:37, 4 September 2009
ShipConstructor Hull
EXPANSION DRAWINGS
Depending on the size and complexity of the project we distinguish 3 different levels in expansion drawings:
- Level 1 all curved plates in 1 drawing, all stringers in 1 drawing
- SHELL
- STRINGERS expanded stringers
- Level 2 curved plates split in 2 drawings, stringers split in 2 drawings
- HULL
- SUPERSTRUCTURE
- STRINGERS-HULL expanded stringers hull
- STRINGERS-SUPERSTRUCTURE expanded stringers superstructure
- Level 3 curved plates and stringers split in several drawings
- HULL
- BOTTOM
- SPRAYRAIL
- SIDE
- RANSOM
- APPENDAGES keels, shaft struts, etc.
- DECK
- SUPERSTRUCTURE
ShipConstructor Structure
PLANAR GROUP NAMES
- Frame
- FR02 full frame
- FR02+050 intermediary frame at 50mm forward of frame 2
NOTE distances are always measured positive, forward of a frame (except for F00) Use 2 digits for frame number, 3 digits for intermediary distance
- Longitudinal
- B0000G_C longitudinal at centerline
- B0500P-LG01 portside longitudinal at 500mm from CL
- B0750S-LG03 starboard longitudinal at 750mm from CL
- B0200-0500P-LG05 skewed portisde longitudinal between B200 and B500
Use 4 digits for buttock distance, 2 digits for LG number
- Deck
- W2500-DK01 deck at W2500 (2500mm above baseline)
- W0200-0500-DK03 skewed deck between W200 and W500
- Use 4 digits for waterline distance, 2 digits for DK number
