Difference between revisions of "Nesting - preparing for CNC"
From NavykI
Navykisysop (talk | contribs) |
|||
| Line 1: | Line 1: | ||
| + | '''SC2005''' | ||
| + | |||
When the nest drawings are approved they need to be prepared for [[NC-Pyros]]. | When the nest drawings are approved they need to be prepared for [[NC-Pyros]]. | ||
| Line 17: | Line 19: | ||
The drawing is now ready for [[NC-Pyros]]. | The drawing is now ready for [[NC-Pyros]]. | ||
| + | |||
| + | '''SC2008'' | ||
| + | |||
| + | In order to prepare the NC cut file the following steps must be followed: | ||
| + | *1. Open nest file. | ||
| + | *2.SC Nesting/NC Pyros/Export to - a window will open. | ||
| + | |||
| + | |||
| + | |||
[[Category:ShipConstructor]] | [[Category:ShipConstructor]] | ||
Revision as of 09:47, 18 September 2009
SC2005
When the nest drawings are approved they need to be prepared for NC-Pyros.
- Create a new folder with the project name and add Nests CNC.
- example: 08007-05 Nests CNC
- Copy the nest files from the ShipConstructor Nests folder into the new folder.
- Rename the files.
- example: 08007-B10-Nest PL04 Steel S5
- Revisions are indicated by adding rev 1.
- example: 08007-B10-Nest PL04 Steel S5 rev 1
- Hide layer stock.
- Use Quick Select to find all part blocks and explode them.
- Use Quick Select to find all ARL entities and explode them.
- Check if all entities are on layer _PRD.
- Remove all vertices, tolerance 0.05.
The drawing is now ready for NC-Pyros.
'SC2008
In order to prepare the NC cut file the following steps must be followed:
- 1. Open nest file.
- 2.SC Nesting/NC Pyros/Export to - a window will open.
