Difference between revisions of "Issues SC2008"

Revision as of 13:41, 9 December 2009

How to display the SC ribbons?
- Type "ribbon" to display the ribbons
- If you don't see the ribbons that you need you have to change the workspace (click on the gear button on the lower right of the screen and select from there what you need).

Correct settings for text style, height, etc. (they disappear after exploding nests?! DXF?!)

minimum import tolerance is 0.1mm, how to increase?
- 0.1 is the minimum value for SC.
trim lines in hull gives big differences because of NURBS lines are transformed into polylines
- Trim the surfaces with Rhino imported curves (exploded), not with nurbs.

layer management (important for bound approval)
- The AutoCad setting LAYEREVALCTL must be 0. Disables the evaluation and notification of new layers.
- For more details search Acad Help for "Use New Layer Notification"
Unreconciled layers cannot be plotted in AutoCad2006.
- Workaround: open and save the drawing in Rhino.
Export - exports all layers, how to export only the solid layers?

Paint is not correct updated in the BOM
- Solved
Nest template - text style
- Solved
Nest - layer use
- all on STOCK now
Parts cannot be exploded outside the project (for export to NC-Pyros)
- Workaround: Export each nest as DXF

Does not snipe in HULL. I can’t align the expansions because I can’t select an intersection or an end point.
In planar group U1-TANKBOT we can’t add some marking lines to the plate. It changes their color when you try to add them but they do not appear on the plate.
It does not bind the approval. We had to bind it on small pieces and use extract components for several planar groups and for the curved group we had to use extract production info for each plate.
In NEST for the 4mm plate doesn’t update the table with the used material weight.
In planar group U1-MAINDECK we can’t make the marking lines to appear dashed. No matter on what side of the plate we put the marking it still appears continuous.
- IssueID: 15179
- Status: Pending scheduling

Softaware instaled:
- Ship Constructor 2008 R4.4.1
- AutoCAD 2009
- AutoCAD 2008 version B.51.0 (UNICODE)

@@ Line 41: / Line 41: @@
 *In NEST for the 4mm plate doesn’t update the table with the used material weight.
 *In planar group U1-MAINDECK	we can’t make the marking lines to appear dashed. No matter on what side of the plate we put the marking it still appears continuous.
+**IssueID: 15179
+**Status: Pending scheduling
 *Softaware instaled: