Difference between revisions of "General applicable rules"
From NavykI
| Line 1: | Line 1: | ||
'''GENERAL APPLICABLE RULES when using SC2005 & SC2008''' | '''GENERAL APPLICABLE RULES when using SC2005 & SC2008''' | ||
| + | |||
| + | |||
| + | [[Rules for viewing the structure:]] | ||
| + | |||
| + | *Frames - always look from AFT to FORWARD | ||
| + | *Longitudinals- always look form Starboard to Portside | ||
| + | *Decks- always look from Top to Down. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | '''PLANAR GROUPS''' | ||
| + | |||
| + | The start of every project is creating planar groups using Rhino sections for frames, longitudinals and decks. | ||
| + | In every planar group after creation must be done the following: | ||
| + | |||
| + | *SC Utilities/Remove vertices below tolerance: 0.05 | ||
| + | *SC Utilities/Activate UCS. SC2005 is planar gr name _C (ex. U1-F00_C) in SC2008 is planar group name_M.(ex. U1-F00_M) | ||
| + | *SC Utilities/3D to 2D | ||
| + | *Add the base lines/Central line using tool palette and customize it for the project. | ||
Revision as of 17:27, 2 March 2009
GENERAL APPLICABLE RULES when using SC2005 & SC2008
Rules for viewing the structure:
- Frames - always look from AFT to FORWARD
- Longitudinals- always look form Starboard to Portside
- Decks- always look from Top to Down.
PLANAR GROUPS
The start of every project is creating planar groups using Rhino sections for frames, longitudinals and decks. In every planar group after creation must be done the following:
- SC Utilities/Remove vertices below tolerance: 0.05
- SC Utilities/Activate UCS. SC2005 is planar gr name _C (ex. U1-F00_C) in SC2008 is planar group name_M.(ex. U1-F00_M)
- SC Utilities/3D to 2D
- Add the base lines/Central line using tool palette and customize it for the project.
