Difference between revisions of "Aventura 43"

From NavykI
Jump to: navigation, search
(Remarks Bathroom 1)
(Remarks Bathroom 1)
Line 110: Line 110:
 
== Remarks Bathroom 1 ==  
 
== Remarks Bathroom 1 ==  
 
*copy from layout-A
 
*copy from layout-A
*see drawing inbox\
+
*see ''inbox\CD-VK-WC-POL-UNIT.dwg'' but check those expansions with ''inbox/00-2D PROJECT X.dwg''
  
 
== Remarks Salon / Galley ==
 
== Remarks Salon / Galley ==

Revision as of 09:40, 11 May 2011

General

  • Lay out A is for the first boat, we have those drawings as a reference
  • Lay out B is our boat (the second), it is a charter version with 8 berths
  • Drawing Lay out B is a preliminary set up drawing only
  • Not all space is used when it is inefficient or hard to reach for use
  • Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400
  • Yard manager used to draw CNC building kits himself in 2D AutoCad
  • Sheets are nested full, if possible move parts to another material in order to obtain this
  • Carpenters are supposed to assemble the interior without drawings (only reference are the codes)

Origin

At intersection of DWL and F32

Material

  • Plywood birch 3050x1250mm
    • 15mm + 2x HPL 0.75mm draw 17mm
      • sole
      • furniture
      • seats
    • 4mm + 1x HPL 0.75mm (Abet 661) draw 5mm
      • lining panels glued to steel construction
    • 4mm + 2x HPL 0.75mm draw 6mm
      • furniture backpanels

Colours

  • Colour for Aventura 43 CHARTER is Abet 661 Collectie Legni - Pino Chambery (0.9mm conform website)
  • When no colour than 2x white backing

Insulation

  • PU foam
  • thickness:
    • shell 40-50mm
    • structure 10mm (can be cut away where necessary)
  • in general keep some space between furniture and insulation

Sole

  • 4mm rubber above enginer room only, all other sole panels are directly on steel construction
  • levels (measured to underside of solepanel):
    • foreship DWL -280
    • midship DWL +559
    • aftship DWL -259
  • sole only where necessary, continue 20mm beyond bhd (for 20x20 slat)
  • sole stops against wet units

Part codes

  • 5 horizontal layers:
    • H1 sole
    • H2 intermediary
    • H3 seat
    • H4 intermediary
    • H5 ceiling
  • 4 vertical segments:
    • V1 on top of H1
    • V2 on top of H2
    • V3 on top of H3
    • V4 on top of H4
  • Compartments
    • AK aft cabin (achterkajuit)
    • VK fore cabin (voorkajuit)
    • SH wheelhouse (stuurhuis)
  • Furniture
    • KN galley (keuken)
    • SF settee (sofa)
  • Partnumbers
    • assigned clockwise


  • Layer use in 2D Autocad
    • DS = section (doorsnede)
    • US = expansion (uitslag)
    • ST = steel (staal)
    • 2 = layout 2
    • FR = frame (spant)
  • example: 2-BET-US-AK-WC-H1-01 = Layout 2, BETimmering-UitSlag-AchterKajuit-WC-Vloer H1, deel 01.

Ceilings

  • 17mm base ply is mounted against all frames (see layer 1-BET-DS*)
  • Aft deck is reinforced with 2 girders, here a '9mm birch plywood part is mounted first'?!?

Wet units

  • completed outside the boat, including sole
  • resting directly on the steel

Remarks Cabin 1 (forepeak)

  • V-berth with filling piece to make it a double berth
  • level berth as layout A, box under bed can be copied (layer 1-BET-US: VK-H2-01, 03 and 04, VK-V1-06, VK-V1-07 and VK-V2-04, see also drawing VK-Agy allat (sounds Hungarian..)
  • box under berth should be the same because of battery for bow thruster
  • if possible use same wardrobes and shelf as in layout A: 1-BET-US-VK-K3-01 and 03 UPDATE: wardrobes must be modified for layout-A and will not fit in layout-B
  • locker in forepeak bhd as in layout-A, this locker has a bottom- forward hinging aftpanel and removable shelf to give access to the chain locker, see dwg VK-OR SZENKRENY K6

Remarks Cabin 2

  • 1 transverse bed 2000x800 direct on sole, see if you can use sole of layout A (VK-H1*)
  • 1 longitudinal bed, max 1900 lenght? Forward engineroom bulkhead has large stiffeners, put first bulkhead in original position as layout A?

Remarks Bathroom 1

  • copy from layout-A
  • see inbox\CD-VK-WC-POL-UNIT.dwg but check those expansions with inbox/00-2D PROJECT X.dwg

Remarks Salon / Galley

  • settee as long as possible, foot end of berth cabin 2 under settee, if not possible than sofa as in layout A (part SF-H3-01)
  • seat height is 350mm + 17mm seat panel
  • galley 'floats' partly above engine room hatches
  • galley parts from layout A can be used again
  • galley forward cabinet houses the distribution panel (W550xH750xD182) in the side, parallel to CL (see lay out A SH-K2)
  • converter in layout A was in locker with distribution panel, now a new location must be found

Remarks Bathroom 2 (aft PS)

  • longitudinal length to be reduced by 100mm
  • minimum interior length 1000mm net

Remarks Bathroom 3 (aft SB)

  • longitudinal length to be reduced by 100mm
  • see cabin 3 for position of aft bulkhead
  • position for forward bulkhead as layout A

Remarks Cabin 3 (PS aft)

  • bunkberth (a lower and upper berth)
  • bhd 17mm direct against steel of F02
  • berth lenght 2000mm, then 5mm (Abet 661)against wet unit
  • berth width 800mm
  • upper berth starts at F02+110mm (see topview layout A), 17mm bhd, bed 2000mm, then 5mm against wet unit (contradiction with lower bed, I will ask yard)
  • escape hatch in transom for position see inbox/SPIEGEL CHARTER.dwg

Remarks Cabin 4 (SB aft)

Mirrorwise of cabin 3