Difference between revisions of "10001 MS Albatros"
From NavykI
Navykisysop (talk | contribs) (→To do) |
Navykisysop (talk | contribs) (→To do) |
||
| Line 1: | Line 1: | ||
== To do == | == To do == | ||
| + | *'''ON''' update weight calculation/hydrostatics for situation at launching | ||
*drawings: | *drawings: | ||
| + | **positions window wiper motors + holes superstructure | ||
**boarding ladder | **boarding ladder | ||
**pasarelle - 24V w actuator Length 2-4m | **pasarelle - 24V w actuator Length 2-4m | ||
**opening railing detail | **opening railing detail | ||
| − | **antenna supports - finalize | + | **'''SH''' antenna supports - finalize drawing |
**removable table on windlass gear casing | **removable table on windlass gear casing | ||
**design exterior furniture (chairs foredeck) | **design exterior furniture (chairs foredeck) | ||
**provisions for lowering mast with their own hoists | **provisions for lowering mast with their own hoists | ||
| − | |||
| − | |||
**update GA | **update GA | ||
**bilge foreship - frame for storage boxes | **bilge foreship - frame for storage boxes | ||
**sole - add hatches inside WH console | **sole - add hatches inside WH console | ||
| + | *spreader lights - Aqua Signal Lubeck | ||
== Hotwork to be done == | == Hotwork to be done == | ||
Revision as of 10:21, 22 July 2011
Contents
To do
- ON update weight calculation/hydrostatics for situation at launching
- drawings:
- positions window wiper motors + holes superstructure
- boarding ladder
- pasarelle - 24V w actuator Length 2-4m
- opening railing detail
- SH antenna supports - finalize drawing
- removable table on windlass gear casing
- design exterior furniture (chairs foredeck)
- provisions for lowering mast with their own hoists
- update GA
- bilge foreship - frame for storage boxes
- sole - add hatches inside WH console
- spreader lights - Aqua Signal Lubeck
Hotwork to be done
- ER air intakes - drains?
- ER air intakes - fire damper
- halyard winches compartment - drain?
- funnel - L-profile firedamper + support morse cable
- aftdeck - shower?
- flagpole - support
- lifebuoys - supports
- crew entrance - door hinges
Sending furniture drawings to Albatros team
- remove WIP from the file name
- make the drawing 'read only'
- update the Albatros drawing list (Google document)
- put PDF on FTP (when it concerns an update, delete the old PDF from FTP)
- send PDF to Joop and CC to Steven - subject Albatros - furniture drawing new or Albatros - furniture drawing update
- if the drawing has electrical connections / appliances than send PDF + DWG to Ionut Melescanu (contactperson RETEC)
- print drawing on A4 colour and put in Albatros file
Hydrostatics
launching 8 july 2011
- 62 tons - weight in crane
- Waterline measurements:
- Fore-> 340mm under the XVI draft mark
- Aft -> 360mm under the XX draft mark
