Difference between revisions of "10001 MS Albatros"

Revision as of 11:41, 22 July 2011

To do

• ON update weight calculation/hydrostatics for situation at launching
• drawings:
  • positions window wiper motors + holes superstructure
  • boarding ladder, for examples see Besenzoni
  • pasarelle - 24V w actuator Length 2-4m
  • opening railing detail
  • SH antenna supports - finalize drawing
  • removable table on windlass gear casing
  • design exterior furniture (chairs foredeck)
  • provisions for lowering mast with their own hoists
  • update GA
  • bilge foreship - frame for storage boxes
  • sole - add hatches inside WH console
• spreader lights - Aqua Signal Lubeck

Hotwork to be done

• ER air intakes - drains?
• ER air intakes - fire damper
• halyard winches compartment - drain?
• funnel - L-profile firedamper + support morse cable
• aftdeck - shower?
• flagpole - support
• lifebuoys - supports
• crew entrance - door hinges

Sending furniture drawings to Albatros team

• remove WIP from the file name
• make the drawing 'read only'
• update the Albatros drawing list (Google document)
• put PDF on FTP (when it concerns an update, delete the old PDF from FTP)
• send PDF to Ionut Melescanu and CC to Steven - subject Albatros - furniture drawing new or Albatros - furniture drawing update
• if the drawing has electrical connections / appliances than send also the DWG file to Ionut Melescanu (contactperson RETEC)
• print drawing on A4 colour and put in Albatros file

Hydrostatics

launching 8 july 2011

• 62 tons - weight in crane
• Waterline measurements:
  • Fore-> 340mm under the XVI draft mark
  • Aft -> 360mm under the XX draft mark