Difference between revisions of "10001 MS Albatros"
From NavykI
(→Hotwork to be done) |
|||
| Line 3: | Line 3: | ||
*drawings: | *drawings: | ||
**positions window wiper motors + holes superstructure | **positions window wiper motors + holes superstructure | ||
| − | **boarding ladder | + | **boarding ladder |
| − | **pasarelle | + | **pasarelle |
**opening railing detail | **opening railing detail | ||
**'''SH''' antenna supports - finalize drawing | **'''SH''' antenna supports - finalize drawing | ||
| Line 42: | Line 42: | ||
**Fore-> 340mm under the XVI draft mark | **Fore-> 340mm under the XVI draft mark | ||
**Aft -> 360mm under the XX draft mark | **Aft -> 360mm under the XX draft mark | ||
| + | |||
| + | == Outfitting == | ||
| + | |||
| + | === Pasarelle === | ||
| + | *24V w actuator | ||
| + | *length | ||
| + | **base about 2000 | ||
| + | **extension about 1500 | ||
| + | *for examples see [http://www.besenzoni.it Besenzoni] | ||
[[Category: Projects]] | [[Category: Projects]] | ||
Revision as of 14:26, 17 August 2011
Contents
To do
- ON update weight calculation/hydrostatics for situation at launching
- drawings:
- positions window wiper motors + holes superstructure
- boarding ladder
- pasarelle
- opening railing detail
- SH antenna supports - finalize drawing
- removable table on windlass gear casing
- design exterior furniture (chairs foredeck)
- provisions for lowering mast with their own hoists
- update GA
- bilge foreship - frame for storage boxes
- sole - add hatches inside WH console
- spreader lights - Aqua Signal Lubeck
- furniture drawings - ceder veneer
- interior door stoppers
Hotwork to be done
- ER air intakes - drains
- funnel - L-profile firedamper + support morse cable
- aftdeck - shower?
- flagpole - support
- lifebuoys - supports
- crew entrance - door hinges
Sending furniture drawings to Albatros team
- remove WIP from the file name
- make the drawing 'read only'
- update the Albatros drawing list (Google document)
- put PDF on FTP (when it concerns an update, delete the old PDF from FTP)
- send PDF to Ionut Melescanu and CC to Steven - subject Albatros - furniture drawing new or Albatros - furniture drawing update
- if the drawing has electrical connections / appliances than send also the DWG file to Ionut Melescanu (contactperson RETEC)
- print drawing on A4 colour and put in Albatros file
Hydrostatics
launching 8 july 2011
- 62 tons - weight in crane
- Waterline measurements:
- Fore-> 340mm under the XVI draft mark
- Aft -> 360mm under the XX draft mark
Outfitting
Pasarelle
- 24V w actuator
- length
- base about 2000
- extension about 1500
- for examples see Besenzoni
