Difference between revisions of "SC Hull"

Revision as of 11:41, 3 April 2009

Templates are usually required when a plate needs mechanical processing to obtain it's desired shape.

We need templates in the following situations:

Single curvature (bending) with constant radius - no template required, give bending info on plate.
Single curvature (bending) without constant radius - 1 template required.
Double curvature (forming) - minimum 3 templates required.

There are 2 types of templates:

Bow Fashion - for plates which are on the center line and have symmetry around the center line (for example a bow cone)
Standard - all other plates

Standard templates are made on reference lines, when this is not convenient then use Auto-Level.

Template name is plate name + reference line name or, when using Auto-Level, plate name + T*

@@ Line 5: / Line 5: @@
 We need templates in the following situations:
-*Single curvature ([[bending]]) with constant radius - no template required, give bending info on plate.
+*''Single curvature ([[bending]]) with constant radius'' - no template required, give bending info on plate.
-*Single curvature ([[bending]]) without constant radius - 1 template required.
+*''Single curvature ([[bending]]) without constant radius'' - 1 template required.
-*Double curvature ([[forming]]) - minimum 3 templates required.
+*''Double curvature ([[forming]])'' - minimum 3 templates required.
+There are 2 types of templates:
+*''Bow Fashion'' - for plates which are on the center line and have symmetry around the center line (for example a bow cone)
+*''Standard'' - all other plates
+''Standard'' templates are made on reference lines, when this is not convenient then use ''Auto-Level''.
+'''Template name''' is ''plate name + reference line name'' or, when using Auto-Level, ''plate name + T*''