Difference between revisions of "14004 Floatel"
From NavykI
| Line 23: | Line 23: | ||
===Additional=== | ===Additional=== | ||
| − | *7 | + | *7 superstructure frames (5 onder, 2 boven) |
| − | * | + | *hatch hull |
| − | *railing | + | *NO railing |
| − | *stairs interior | + | *NO stairs interior |
| − | *stairs exterior | + | *NO stairs exterior |
| − | *'kraaiennest' | + | *NO 'kraaiennest' |
| − | * | + | *bridge connection |
| + | *calculate influence of filled whirlpool on heel | ||
| + | |||
| + | ==Meeting notes== | ||
| + | *Peter will inform if boat needs to be sailing or not for CE approval | ||
| + | *BOA 4980mm for roadtransport (including wooden sideplanking) | ||
| + | *sceptic tank [http://www.afmitech.com/products/bever-combi-compact-buoyant Afmitech Bever Combi Compact] | ||
| + | **contact person Jan Boede de Jong | ||
| + | **tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible | ||
| + | **bench and bathing platform to be removable for this purpose | ||
| + | *hull fixtures by Navyk | ||
| + | *Dual Docker removable mounting plates by Navyk | ||
| + | *removable cleats by Navyk | ||
| + | *hull construction: | ||
| + | **bended sheets 3x2m | ||
| + | **on top 21mm wide flanges | ||
| + | **bottom slightly rounded for additional stifness | ||
| + | **all tubes rectangular 120x60 | ||
| + | **cut out in tubes for draining rainwater from deck | ||
| + | **NO double transom (as in Floating 44) | ||
| + | **technical space | ||
| + | ***in SB hull | ||
| + | ***access hatch CO 500x500 | ||
| + | ***space position by Niels | ||
| + | **pipe through hull in way of whirlpool for drainpipe? | ||
| + | **bridge connection | ||
| + | **top of wooden planking in line with interior sole | ||
| + | *wooden planking | ||
| + | **Lariks 28mm | ||
| + | **beams H60mm | ||
| + | *bathing area in front of bench | ||
| + | **alu grills on alu structure | ||
| + | **grills tbd by Linskens | ||
| + | *house | ||
| + | **roof of sandwich panel (Kingspan Unidek): | ||
| + | ***10mm OSB | ||
| + | ***160mm ESP / wooden beams at 450 COC | ||
| + | ***10mm OSB | ||
| + | **side walls | ||
| + | **load for strength calculation to be determined by Linskens | ||
| + | *insulated and heated drain hose for whirlpool Ø80mm | ||
| + | |||
[[Category: Projects]] | [[Category: Projects]] | ||
Revision as of 16:35, 29 January 2014
Contents
General
- yard budget for developing and building 1st hull €35.000 (Floating 44 was €20.000, Comforship was €40.000 (done by Michiel van Vossen))
- Material - aluminum
- CE Category C (required by marina's)
- floating hotel room, will never leave it's berth after mooring
- Hull - as cheap as possbile to produce (combination of smart engineering, material reduction and labor reduction)
- Floating 44 (project 13006):
- displacement 14 tons
- floating at DWL
- trim aft 40mm
- transverse cross stiffeners removed
- see dwg P:\Offers\14004 Houseboat\Final draw
Scope
- no stability?
- only hydrostatics
- weight only interpolation with Floating 44
- bench is alu
- boat is non sailing unless CE insists (?!)
Additional
- 7 superstructure frames (5 onder, 2 boven)
- hatch hull
- NO railing
- NO stairs interior
- NO stairs exterior
- NO 'kraaiennest'
- bridge connection
- calculate influence of filled whirlpool on heel
Meeting notes
- Peter will inform if boat needs to be sailing or not for CE approval
- BOA 4980mm for roadtransport (including wooden sideplanking)
- sceptic tank Afmitech Bever Combi Compact
- contact person Jan Boede de Jong
- tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible
- bench and bathing platform to be removable for this purpose
- hull fixtures by Navyk
- Dual Docker removable mounting plates by Navyk
- removable cleats by Navyk
- hull construction:
- bended sheets 3x2m
- on top 21mm wide flanges
- bottom slightly rounded for additional stifness
- all tubes rectangular 120x60
- cut out in tubes for draining rainwater from deck
- NO double transom (as in Floating 44)
- technical space
- in SB hull
- access hatch CO 500x500
- space position by Niels
- pipe through hull in way of whirlpool for drainpipe?
- bridge connection
- top of wooden planking in line with interior sole
- wooden planking
- Lariks 28mm
- beams H60mm
- bathing area in front of bench
- alu grills on alu structure
- grills tbd by Linskens
- house
- roof of sandwich panel (Kingspan Unidek):
- 10mm OSB
- 160mm ESP / wooden beams at 450 COC
- 10mm OSB
- side walls
- load for strength calculation to be determined by Linskens
- roof of sandwich panel (Kingspan Unidek):
- insulated and heated drain hose for whirlpool Ø80mm
