Difference between revisions of "15012 pontoon AMS"
From NavykI
(→Rules & Regulations) |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 7: | Line 7: | ||
**aftship to have recess for receiving bow of pushboat | **aftship to have recess for receiving bow of pushboat | ||
**2 coupling winches at aftdeck, minimum 500mm from boat side, about 10 ton per winch | **2 coupling winches at aftdeck, minimum 500mm from boat side, about 10 ton per winch | ||
| + | ***L700, W300 (with wheel 400), H600 (with wheel 900) | ||
**hatches of sufficient size for each compartment with coaming 500mm height | **hatches of sufficient size for each compartment with coaming 500mm height | ||
| Line 14: | Line 15: | ||
**suction box to have removable water inlet grills | **suction box to have removable water inlet grills | ||
**idea is to have a box which can be lowered beneath the bottom with 2 worm winches | **idea is to have a box which can be lowered beneath the bottom with 2 worm winches | ||
| + | **worm winches: | ||
| + | ***L300 W270 H200 (without handle) | ||
| Line 24: | Line 27: | ||
*Container(s) | *Container(s) | ||
**twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon | **twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon | ||
| + | ***fifi unit | ||
| + | ***foam tank | ||
**frames for containers and generator to be heavy and with flexible mounts, if necessary with reinforced construction below deck, to avoid pontoon becoming a resonance box. | **frames for containers and generator to be heavy and with flexible mounts, if necessary with reinforced construction below deck, to avoid pontoon becoming a resonance box. | ||
| Line 42: | Line 47: | ||
**fenders - at deck edge eyes for mounting car tires (see example drawings) | **fenders - at deck edge eyes for mounting car tires (see example drawings) | ||
**off center electric anchor winch with wire | **off center electric anchor winch with wire | ||
| − | **anchor to be stored at deck | + | **anchor |
| − | **winch to match regulations | + | ***to be stored at deck |
| + | ***min. weight 95kh | ||
| + | ***see [http://www.saxtonmarine.co.uk/pool_tw_execution_standard_hhp.html Saxton Pool anchor] | ||
| + | **winch | ||
| + | ***to match regulations | ||
| + | ***L700 W450 H750 | ||
| + | |||
| Line 81: | Line 92: | ||
*pushboat recess details (integrate in construction drawing?) | *pushboat recess details (integrate in construction drawing?) | ||
*e-box / shore connection plan? | *e-box / shore connection plan? | ||
| + | |||
| + | |||
| + | |||
| + | == Rules & Regulations == | ||
| + | *technical requirements for inland waterway vessels and repealing - Council Directive 82/714/EEC | ||
| + | *ADN (Chapter 7.1.2.19.1) | ||
| + | |||
| + | *WORKING SITE CRAFT | ||
| + | |||
[[Category: Projects]] | [[Category: Projects]] | ||
Latest revision as of 16:54, 15 April 2015
- Pontoon to be suitable for use in oil ports (regulations)
- Construction
- width to be extended by 2m at CL
- deck load 2 ton/m2 minimum
- aftship to have recess for receiving bow of pushboat
- 2 coupling winches at aftdeck, minimum 500mm from boat side, about 10 ton per winch
- L700, W300 (with wheel 400), H600 (with wheel 900)
- hatches of sufficient size for each compartment with coaming 500mm height
- Suction box
- water intake box for fifi container suitable for flow rate 23m3/minute
- suction box to have removable water inlet grills
- idea is to have a box which can be lowered beneath the bottom with 2 worm winches
- worm winches:
- L300 W270 H200 (without handle)
- Railing and safety
- at longitudinal sides a horizontal pipe Ø80-100 thickwalled, about 150mm above deck, stanchions every 1500mm, on top of it the railing, total height to be 1m
- deck to have non skid strips
- everything conform regulations
- Container(s)
- twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon
- fifi unit
- foam tank
- frames for containers and generator to be heavy and with flexible mounts, if necessary with reinforced construction below deck, to avoid pontoon becoming a resonance box.
- twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon
- Fuel tanks
- total capacity 9 ton
- 2 tanks H1000, W1500, length to be determined by Navyk
- crossover
- tanks to have a gauge glass
- tanks to have a BOBS system (X-BOB)
- fill station conform regulations
- Mooring and anchoring
- 2 bollards at every corner (I suggest we keep existing 6 bollards)
- bollards to be non skid (by means of welding points)
- bollards to be checked with regulations (reinforcement required below deck?)
- fenders - at deck edge eyes for mounting car tires (see example drawings)
- off center electric anchor winch with wire
- anchor
- to be stored at deck
- min. weight 95kh
- see Saxton Pool anchor
- winch
- to match regulations
- L700 W450 H750
- Name and colors
- colorscheme
- RAL3020 red
- RAL9005 black
- RAL7015 grey
- RAL1018 yellow
- name and buildnumber on pontoon (name P.A. 14?)
- colorscheme
- Electric
- generator set 15kVA on deck
- shore connection
- Bilgesystem conform class
- Masts and lights
- 2x mast off center at each end
- decklights for save working during night
- nav lights + daylight signals for anchor and sailing conform BPR
- 2x decklight at upper container edge
Drawing list[edit]
- general arrangement
- construction drawing
- deck plan
- water suction box
- foundation plan fifi unit and generator
- fuel tanks, piping and fill station
- bilge pumps
- masts and lighting
- pushboat recess details (integrate in construction drawing?)
- e-box / shore connection plan?
Rules & Regulations[edit]
- technical requirements for inland waterway vessels and repealing - Council Directive 82/714/EEC
- ADN (Chapter 7.1.2.19.1)
- WORKING SITE CRAFT
