Difference between revisions of "15038 Bestevaer 45 ST Pure"

Revision as of 09:50, 11 July 2015

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

TO DO

General

• • hatch coamings
  • port hole boxes superstructure
  • leather ceilings
  • lining > V-grooves, every 100mm, parallel to deckline/sheer
  • access bolt connection for mounting superstructure
  • drill holes and notches for assembly
  • heating > add bulkhead penetrations for hose and grills

Fore Cabin

• hatches in bed bottom
• battery box

Salon

• • pillar mast bulkhead > connected with FB 8mm, split mast bulkhead
  • table
  • chain plate reinforcement > mask
  • lower hinge in forward upper cabinet will be solved by KMY

Galley

• pillar
• re-arrange front drawings to avoid collision with table
• sink > new model?
• fridge > ventilation by holes in locker bottom next to plinth and holes in upper part of PS counter side

Bathroom

• sole detail
• yard will inform if glass doors in bathroom will be applied or not
• material > panels can be normal HPL as rest of boat, the special quality W400-VV is canceled.

Aft cabins

• PS > bulkhead cutout, profiles, raise horizontal profile in line with sole deckhouse
• bed bottoms > hatches for access storage space under, support?
• lining > align knuckles with V-grooves

Deck house

• 'pillar boxes' to be moved outboard 10mm
• all panels to be white, except for bench fronts, 'pillar boxes' besides entrance and top of guest cabin SB
• bench fronts and top of guest cabin to be covered with 6mm bamboo as for entrance doors
• add solid profiles around top of guest cabin.

Sheet estimation

transverse grain

• 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
• 6mm single bamboo - 1 sheet - bench fronts DH

Questions

• General
  • corners of plinths above lockers > painted solid?
  • bulkhead corners deckhouse?
  • lining
    • grooves horizontal or parallel to deck?
    • distance 100mm?

• Fore cabin
  • locker shelf heights adjustable?
  • net door width is 500

• Saloon
  • details of mast support
  • lower hinge in FWD cabinet
  • back and side cushions will extend beyond top and front?
  • table?

• Galley
  • fridge ventilation top?
  • pillar position?
  • tap cannot be behind sink but will be next to it.

• Bathroom
  • wash basin far too big
  • furniture material VV too?
  • Glass doors?

• Deckhouse
  • top is white because we don't have 12mm bamboo
  • bench front is large area with only small piece of bamboo visible

• Guest cabin
  • storage under bed?
  • door rotates inside or outside?

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry

Exchange work

• KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
• integration of heater ducting is not in contract
• info is not delivered on Monday, June 15 but came partially on June 16 and 17

As discussed

July 1, 2015

• furniture doors - 17mm is OK
• entrance hatch recess box - PUR insulated, put plywood panel in front
• stair steps solid wood
• cockpit sole - covered with cork 9mm
• lining - leather panels are canceled
• porthole boxes - yard makes tube, out of our delivery

June 16, 2015

• black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015

• tolerances
  • vertical:
    • sole to supporting structure - 0mm
    • ceiling to structure - 0mm
  • horizontal
    • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
• insulation type is PUR
• grain orientation will be vertical
• sole supports are alu tube 50x30x?
• cabinet interiors to be white
• KMY workshop facilities:
  • no veneer press
  • edge band machine for straight edges
  • lamello machine
  • round router bits R6, R8, R10, R12
• Navyk will route the ducting for airheating through the interior
• Navyk is free to use their own material naming
• Navyk will give a price offer for the aluminium sole supports

Structure model - modifications!

• Forepeak bulkhead - stiffeners will be on aft side (cabin side)
• Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
• Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
• sole structure - to be determined, Navyk will make a price offer for this