Difference between revisions of "15038 Bestevaer 45 ST Pure"

From NavykI
Jump to: navigation, search
(→‎Solid model)
(→‎Solid model)
Line 20: Line 20:
 
**Drawers > propose
 
**Drawers > propose
 
*Sole
 
*Sole
−
**Split for sheet size (but first to finalize sole structure)
+
**Base sole
 +
***done
 
**Finish sole
 
**Finish sole
 
***add radi in way of solid profiles
 
***add radi in way of solid profiles
−
***split in way of hatches
 
 
*Forecabin
 
*Forecabin
 
**lining PS > basewood for alu structure
 
**lining PS > basewood for alu structure

Revision as of 10:00, 25 July 2015

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

Planning

  • Conform mail Willem Berends of July 16
  • WK 30 Navyk to implement all comments and changes.
  • WK 30 End of the week Navyk will send the draft files for review.
  • WK 32 Bamboo wood will be delivered to KMY for surface preparations.
  • WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
  • WK 34 All wood material (exl. floor) will be deliverer at CNC works.
  • WK 34 End of this week Navyk will deliver the complete files to KMY.
  • WK 35 CNC will cut all materials en deliver to the KMY.

TO DO

Solid model

  • General
    • Entrance doors
      • update sill
      • check handle height
    • Heating > make all outlets, route?
    • Drawers > propose
  • Sole
    • Base sole
      • done
    • Finish sole
      • add radi in way of solid profiles
  • Forecabin
    • lining PS > basewood for alu structure
  • Salon
    • check
  • Galley
    • done?
  • Bathroom
    • entrance door
      • shorten cutout under
      • upper rail full height
    • ceiling over inner walls
    • ceiling salon over outer walls
    • upper locker > add hatch in back for access technique
    • add deck hatch cutout
  • Aft ship
    • rename after assembly order
    • Guest Cabin
      • double wall
      • Lining > basewood for alu structure
      • add hatches for access technical space
    • Pilot cabin
      • Lining > basewood for alu structure
    • Deckhouse
      • stairs > storage
      • pillar boxes > check recesses
      • check access for welding aft bulkhead
  • Superstructure
    • Base ceiling
      • cutouts in way of leather panels
      • split for sheet size


Navyk remarks for KMY

  • push button > knob can be rotated 90° or 180°?
  • Skyscreen with liner?
  • sole hatches in furniture will have fingerhole or Southco hardware?

General

  • access bolt connection for mounting superstructure
  • drill holes and notches for assembly
  • sole structure > create
  • heating > add bulkhead penetrations for hose and grills
  • labels > create excel sheet with codes for each part
  • additional files:
    • Marlan templates
    • metal parts
      • handrails > st.st. Ø28
      • poles (structural) > aluminum > galley Ø60 / salon Ø80
  • driver-drill
    • total length including bit > 210mm
    • distance shaft center to top of housing > 36mm

hatches and portlights

  • Deckhatches:
    • Lewmar Size 60 low profile: 39960030
    • Lewmar Size 30 low profile: 39930030
  • Portligths in superstructure:
  • Portlights in cockpit:

hardware

  • finish > stainless steel

sole

  • base > 18mm ocoume, varnished all around
  • finish > chest nut
  • margin boards > width 70mm
  • hatches > to be determined in combination with alu sole supporting structure
  • hatch locking device > see material list

lining

  • V-grooves, every 100mm, parallel to deckline/sheer

ceilings

entrance doors

  • door width net standard > 560mm
  • door width net minimum > 500mm
  • gap under door > ?
  • core > plywood ocoume 18mm
  • cover panels > plywood bamboo 7mm
  • hinges?
  • mortise lock?
  • handles?
  • door plates/shields?
  • height doorhandles?
  • door catch?
  • ajar hook?

lockers

  • shelves > mounted with shelf supports (Hettich)
  • FYI > solid corner profiles in furniture plintes will be painted white
  • hinges > Hettich Intermat Soft....
  • drawer runners > Hettich Quadro 30
  • closing device > Kroon 372369
  • shelf supports

seats

  • seat cushion thickness 100mm
  • back vertical
  • seat panel 340mm above sole

berths

  • matrass thickness 100mm
  • bed slats 40 mm from Spacerflex

Fore Cabin

Navyk remarks for KMY

  • bed > storage bottom is OC-18
  • lining > in way of sole it could be replaced by bracket boxes
  • batteries > additional bottom panel with battery cutouts could have cutouts for nylon straps to fasten the batteries
  • bed > hatch for access mast bhd bolts?

Salon

  • table > make hatch in way of shaft
  • lower hinge in forward upper cabinet will be solved by KMY
  • upper locker PS fore > add hatch in back for access technique (KMY?)

Galley

Navyk remarks for KMY

  • fridge vent in plinth interferes with LED light
  • fridge vent in cabinet side to be => 6500mm2 > apply Hafele grill?
  • sole > large opening (no hatch) under galley counter

Bathroom

Aft cabins

  • PS > bulkhead cutout, profiles, raise horizontal profile in line with sole deckhouse
  • bed bottoms > hatches for access storage space under, support?
  • lining > align knuckles with V-grooves
  • entrance door > rotates inside
  • technical space > add access hatches in longitudinal panels
  • high locker > add plinth on top, moved outboard
  • high locker > add hatch in back for access technique

Deck house

  • 'pillar boxes' to be moved outboard 10mm
  • 'pillar boxes' add recesses for technical panels, dimensions? KMY
  • 'pillar boxes' pillar to model
  • all panels to be white, except for bench fronts, 'pillar boxes' besides entrance and top of guest cabin SB
  • bench fronts and top of guest cabin to be covered with 6mm bamboo as for entrance doors
  • add solid profiles around top of guest cabin.
  • WJ will provide correct model of entrance
  • add solid profiles at vertical corners of transition salon/guest cabin to deck house
  • stairs > add solid profile to vertical corner of lower step
  • recess behind seats > about 50 wide, 100 deep
  • lining besides entrance > add solid profile at vertical (skewed) corner
  • benches > seat width 550mm
  • benches > back inclinated
  • benches > raise bottom to have 950mm between seat and ceiling, this 950 is including or excluding the cushion? KMY
  • Aft cabin lining > reduce lost space behind lining
  • Stair steps > use for storage (3 steps)
  • Aft cabin top > removable plexiglass panel for light and air, detail? KMY
  • PS bench > remove armrest, make suitable for transverse seating
  • bed bottoms > raise 100mm for additional storage and wider matrass
  • bed bottoms > hinged hatch
  • bed PS > large drawer under
  • handrail SB > to model
  • handrail/pillar PS > to model

Navyk remarks for KMY

  • space between aft wall lining and aft bulkhead > make storage? (behind armrest)

Superstructure

Skyscreen

  • model to be determined > KMY

Modeling refereneces

Tolerance

  • distance to frame flanges 20

Lining

  • deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

  • superstructure
    • offset 58 from inside shell
    • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
    • interference with stringers <2, to be solved on board

Sheet estimation

transverse grain

  • 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
  • 6mm single bamboo - 1 sheet - bench fronts DH

Milling

  • Subcontracted to CNC werk
  • Router bits Ø10 and Ø20
  • Questions
    • contours > layer for each bit diameter?
    • drilling holes > layer for each diameter + depth?
  • Labels > 3 lines is possible? (ID, sheet ID, material ID)
  • drilling holes > mark with cross or circle of correct diameter?

Aluminum

  • mast bulkhead > bolted? requires hatch in bed
  • mast bulkhead > cutout entrance door + heater hose
  • aft bulkhead > cutout for heater hose
  • galley > pillar
  • bolt connection > create detail

People

  • Eeuwe Kooi - director/owner (not directly involved)
  • Willem Berends - chain manger (responsible for contract)
  • Willem-Jan van der Vegt - engineer (our contactperson)
  • Haaie Andringa - foreman carpentry

Exchange work

  • KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
  • integration of heater ducting is not in contract
  • info is not delivered on Monday, June 15 but came partially on June 16 and 17

As discussed

July 1, 2015

  • furniture doors - 17mm is OK
  • entrance hatch recess box - PUR insulated, put plywood panel in front
  • stair steps solid wood
  • cockpit sole - covered with cork 9mm
  • lining - leather panels are canceled
  • porthole boxes - yard makes tube, out of our delivery

June 16, 2015

  • black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015

  • tolerances
    • vertical:
      • sole to supporting structure - 0mm
      • ceiling to structure - 0mm
    • horizontal
      • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
  • insulation type is PUR
  • grain orientation will be vertical
  • sole supports are alu tube 50x30x?
  • cabinet interiors to be white
  • KMY workshop facilities:
    • no veneer press
    • edge band machine for straight edges
    • lamello machine
    • round router bits R6, R8, R10, R12
  • Navyk will route the ducting for airheating through the interior
  • Navyk is free to use their own material naming
  • Navyk will give a price offer for the aluminium sole supports

Structure model - modifications!

  • Forepeak bulkhead - stiffeners will be on aft side (cabin side)
  • Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
  • Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
  • sole structure - to be determined, Navyk will make a price offer for this
Retrieved from "http://navyki.navyk.ro/index.php?title=15038_Bestevaer_45_ST_Pure&oldid=6436"