Difference between revisions of "CNC remarks KMY"
From NavykI
(Created page with "*Material estimation **must inidicate clearly the quality of the panel ''''sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'...") |
|||
| Line 1: | Line 1: | ||
| − | * | + | == Navyk == |
| + | *material estimation / BOM | ||
**must inidicate clearly the quality of the panel ''''sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'''' | **must inidicate clearly the quality of the panel ''''sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'''' | ||
| + | *groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB) | ||
| + | *lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues | ||
| + | *grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company) | ||
| + | *technical hatches > replace half overlap with ring? | ||
| + | *cutouts portholes and deck hatches > edgeband applied, so increase cutout | ||
| + | *base panels portholes and deck hatches > 4mm cork applied | ||
| − | == | + | == KMY == |
| + | *use larger panels 3050x1550? no split parts, less waste? | ||
| − | *drill holes > not drilled (overlooked, only the crosshairs on no process layer were noticed and removed) | + | == Material supplier == |
| + | *sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm) | ||
| + | |||
| + | == Milling == | ||
| + | *delivery | ||
| + | **deliver parts sorted per group (not done for Pure) | ||
| + | **deliver small parts seperated from panel (not yard to remove the small parts out of the panel) | ||
| + | *issues | ||
| + | **drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed) | ||
[Category: Interior] | [Category: Interior] | ||
Revision as of 11:01, 30 October 2015
Contents
[hide]- material estimation / BOM
- must inidicate clearly the quality of the panel 'sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'
- groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB)
- lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues
- grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company)
- technical hatches > replace half overlap with ring?
- cutouts portholes and deck hatches > edgeband applied, so increase cutout
- base panels portholes and deck hatches > 4mm cork applied
KMY
- use larger panels 3050x1550? no split parts, less waste?
Material supplier
- sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)
Milling
- delivery
- deliver parts sorted per group (not done for Pure)
- deliver small parts seperated from panel (not yard to remove the small parts out of the panel)
- issues
- drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed)
[Category: Interior]
