Difference between revisions of "CNC remarks KMY"

Revision as of 13:57, 4 November 2015

Cutout radi, even for rectangular cutouts, are not tangent with straight edge.

Navyk

• material estimation / BOM
  • must inidicate clearly the quality of the panel 'sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'
• groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB)
• lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues
• grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company)
• technical hatches
  • replace half overlap with ring?
  • conform JanW it is perfect for SN40
  • try first with machine setting from table instead of top of material?
  • KMY might prefer to give hatch and HIP an edgeband and then a counterring is the only option and the problem is solved too
• cutouts portholes and deck hatches > edgeband applied, so increase cutout
• base panels portholes and deck hatches > 4mm cork applied

KMY

• use larger panels 3050x1550? no split parts, less waste?

Material supplier

• sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)

Milling

• delivery
  • deliver parts sorted per group (not done for Pure)
  • deliver small parts seperated from panel (not yard to remove the small parts out of the panel)
• issues
  • drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed)

[Category: Interior]