Difference between revisions of "CNC remarks KMY"
From NavykI
(→Navyk) |
|||
| Line 3: | Line 3: | ||
== Navyk == | == Navyk == | ||
| − | *material estimation / BOM | + | *material estimation / BOM > inidicate clearly the quality of the panel ''''sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'''' |
| − | |||
*groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB) | *groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB) | ||
*lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues | *lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues | ||
| − | *grain > should continue for cabinet doors / drawer fronts, mill with | + | *grain > should continue for cabinet doors / drawer fronts, mill with 4mm (check with milling company) |
| − | *technical hatches | + | *technical hatches > replace half overlap with ring (although conform JanW the half overlap works out perfect for SN40) |
| − | + | *base panels portholes and deck hatches > apply 4mm cork | |
| − | *base panels portholes and deck hatches > 4mm cork | ||
*'''line entities and arc entities shorter then 1mm > remove from milling contour (conform mail Dec-03 2015)''' | *'''line entities and arc entities shorter then 1mm > remove from milling contour (conform mail Dec-03 2015)''' | ||
Revision as of 16:47, 17 December 2015
Cutout radi, even for rectangular cutouts, are not tangent with straight edge.
Contents
- material estimation / BOM > inidicate clearly the quality of the panel 'sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'
- groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB)
- lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues
- grain > should continue for cabinet doors / drawer fronts, mill with 4mm (check with milling company)
- technical hatches > replace half overlap with ring (although conform JanW the half overlap works out perfect for SN40)
- base panels portholes and deck hatches > apply 4mm cork
- line entities and arc entities shorter then 1mm > remove from milling contour (conform mail Dec-03 2015)
KMY
- use larger panels 3050x1550? no split parts, less waste?
Material supplier
- sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)
Milling
- delivery
- deliver parts sorted per group (not done for Pure)
- deliver small parts seperated from panel (not yard to remove the small parts out of the panel)
- issues
- drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed)
