Difference between revisions of "Alarm system"

Latest revision as of 10:37, 7 April 2017

Bogdan is in charge

Navyk alarm system consists of:

• Central alarm:
  • smoke sensors
  • movement sensors
  • door contact

• DVR surveylence
  • use ViewCam Lite for mobile phones
  • IP: 5.2.208.29 (for mobile devices)5.2.208.29 new use [navyk.com] on mobile phones
  • IP: 192.168.11.9:85 or http://cameras.navyk.local/ (internet explorer from inside the office)
  • port: 85
  • user: navyk

• Alarm visualization
  • *3 will show the alarmcode
    • 1-movement sensor entrance
    • 2-6 movement sensors (2 is East window, 6 is West window)
    • 7 entrance switch
    • 8 free
    • 9 smoke sensor entrance (old part of the office)
    • 10 smoke sensor Cristi (new part of the office)
    • 11 smoke sensor Steven (corner partition)
    • 12 smoke sensor server room
  • If we press and keep pressed the triangle button (medical emergency) the alarm will start calling the notification numbers(no alarm from the outside unit)

• When the alarm starts it will start calling Simona, Bogdan and Ovidiu. (not necessarily in this order)
  • To let the alarm to call the next number you can dismiss the call.
  • To stop the alarm you need to answer the phone and longpress the 1 key from the phone.
    • Sometimes it might skip the next number if you dismiss the call
  • When we press 1 it will stop the phone loop, but the alarm will continue ringing until there is no stimulation to the sensors.

• If we want Gabi can provide a wire to Arduino in order to start the alarm with the existing smoke sensors(4 signal wires can be provided).

Section added by Bogdan[edit]

• Reset fire alarm: *72
• Display last alarm: *3
• Return: #