Difference between revisions of "Aventura 43"
From NavykI
(→Hardware) |
(→Remarks Cabins aft) |
||
(50 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
== General == | == General == | ||
+ | *Yard is [http://www.centreboard.eu Centreboard (HU)] | ||
*Lay out A is for the first boat, we have those drawings as a reference, see ''inbox/00-2D PROJECT X.dwg'' | *Lay out A is for the first boat, we have those drawings as a reference, see ''inbox/00-2D PROJECT X.dwg'' | ||
*Lay out B is our boat (the second), it is a charter version with 8 berths | *Lay out B is our boat (the second), it is a charter version with 8 berths | ||
− | |||
*Not all space is used when it is inefficient or hard to reach for use | *Not all space is used when it is inefficient or hard to reach for use | ||
*Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400 | *Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400 | ||
Line 9: | Line 9: | ||
*Sheets are nested full, if possible move parts to another material in order to obtain this | *Sheets are nested full, if possible move parts to another material in order to obtain this | ||
*Carpenters are supposed to assemble the interior without drawings (only reference are the codes) | *Carpenters are supposed to assemble the interior without drawings (only reference are the codes) | ||
+ | *access behind joinery - every space needs to be accessible for cleaning (to remove construction debris which might block bilgepumps) | ||
== Origin == | == Origin == | ||
Line 16: | Line 17: | ||
== Material == | == Material == | ||
− | *Plywood birch | + | *see [[CNC interiors - work procedure]] |
+ | |||
+ | *Plywood birch 3030x1245mm - density 600 kg/m3 | ||
+ | *HPL density - 1.4 kg /m2 for 1mm thickness | ||
**15mm + 2x HPL 0.75mm ''draw 17mm'' | **15mm + 2x HPL 0.75mm ''draw 17mm'' | ||
***sole | ***sole | ||
***furniture | ***furniture | ||
***seats | ***seats | ||
+ | **9mm + 2x HPL 0.75mm ''draw 11mm'' | ||
**4mm + 1x HPL 0.75mm (Abet 661) ''draw 5mm'' | **4mm + 1x HPL 0.75mm (Abet 661) ''draw 5mm'' | ||
***lining panels glued to steel construction | ***lining panels glued to steel construction | ||
Line 31: | Line 36: | ||
*Abet 313 Nut - furniture doors | *Abet 313 Nut - furniture doors | ||
*2x white backing - where no colour is required | *2x white backing - where no colour is required | ||
− | *white - all backing | + | *white - all backing |
− | *Vescom | + | *Vescom is glued with foam on white panel |
+ | |||
+ | == Upholstery == | ||
+ | |||
+ | *matress thickness 120mm | ||
+ | *sole covering is carpet (loose) | ||
== Hardware == | == Hardware == | ||
− | *Hinges Hettich | + | *Hinges |
− | ** | + | **concealed hinge full overlay - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 220 |
− | **mounting plate | + | **concealed hinge inset - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 222 |
+ | **screw-on cross mounting plate - Hettich System 8099 - Distance 0,0mm - Hettich 9 071 670 | ||
+ | **screw-on cross mounting plate - Hettich System 8099 - Distance 5,0mm - Hettich 9 071 673 | ||
*Push button - Southco Marine MP-05-H21-F3-K3 (supplier Kroon) | *Push button - Southco Marine MP-05-H21-F3-K3 (supplier Kroon) | ||
+ | *supplier is [http://www.ostermann.eu/en.html Medomat (Ostermann)] | ||
== Insulation == | == Insulation == | ||
Line 51: | Line 64: | ||
== Appliances == | == Appliances == | ||
− | * toilet - Planus Sky 560 | + | *toilet - Planus Sky 560 |
+ | *heating by [http://www.warmteservice.nl Warmteservice] Zwolle | ||
+ | **T: 038-467 15 20 | ||
+ | **E: zwolle@warmteservice.nl | ||
+ | **contact person (shop manager): Job van Hoogmoed | ||
+ | **convector grill: search on supllier website for 'sierrooster' | ||
+ | |||
+ | == Electrical installation == | ||
+ | *see layer '00-E-SCHEMA-24V' and '00-E-SCHEMA-230V' | ||
== Sole == | == Sole == | ||
Line 65: | Line 86: | ||
== Ceilings == | == Ceilings == | ||
− | *17mm | + | *17mm basewood is mounted against all frames (see layer 1-BET-DS*) |
− | *thickness ceiling | + | *thickness ceiling strips 13mm - see layer '0A-PLAFONDPLATEN' |
*aft cabin has an addtional base panel of 9mm because of girders | *aft cabin has an addtional base panel of 9mm because of girders | ||
− | == Port hole boxes == | + | == Port hole boxes and curtain pockets== |
− | * | + | *curtain pockets |
− | *lining is 8mm and comes with porthole ''see layer frees Berken Naturel 04 (myst be 8mm)'' | + | **depth 75mm |
+ | **lining is 8mm and comes with porthole ''see layer frees Berken Naturel 04 (myst be 8mm)'' | ||
+ | *porthole boxes | ||
+ | **material of sides is 15mm + 2x HPL 0.75mm (draw 17mm) | ||
+ | **sides to have 10mm overlength at hull side | ||
+ | **porthole panel against steel is 9mm + 2x HPL 0.75mm (draw 11mm) | ||
== Wet units == | == Wet units == | ||
Line 79: | Line 105: | ||
*resting directly on the steel | *resting directly on the steel | ||
*ceilings are round, 17mm, cuts in top to help bending | *ceilings are round, 17mm, cuts in top to help bending | ||
+ | *furniture doors | ||
+ | **doors + bulkhead cutouts are rectangular | ||
+ | **door seam is 2mm | ||
+ | **door and bulkhead edge finish is paint | ||
== Doors == | == Doors == | ||
Line 132: | Line 162: | ||
== Remarks Cabin 2 == | == Remarks Cabin 2 == | ||
− | |||
− | |||
*37mm space aft of wetunit for water connections? | *37mm space aft of wetunit for water connections? | ||
Line 154: | Line 182: | ||
== Remarks Bathroom 2 (aft PS) == | == Remarks Bathroom 2 (aft PS) == | ||
− | * | + | *modifications made by yard, see mail (mail 20-06-2011) |
− | + | *locker under sink to be lowered 100mm (mail 20-06-2011) | |
== Remarks Bathroom 3 (aft SB) == | == Remarks Bathroom 3 (aft SB) == | ||
Line 163: | Line 191: | ||
*position for forward bulkhead as layout A | *position for forward bulkhead as layout A | ||
− | == Remarks | + | == Remarks Cabins aft == |
+ | |||
+ | *modify: | ||
+ | **overhead locker enters into ceiling - lower with 6mm (front is OK) | ||
+ | **frame intersects with ceiling - make cutout in ceiling, see layout-A | ||
+ | **ceiling stops against overhead locker front, goes at sides beyond it - see layout-A | ||
+ | **wardrobe shelves are too short, extend with 5 | ||
+ | **standard hatch detail: change overlap from 20 to 15 | ||
+ | **inclinated sole panels - exterior contour to be parallel with CL | ||
+ | **inclinated sole panels - extend on aft side to allow for 20x20 for supporting wall? | ||
+ | **aft bhd SB - groove for supporting upper bed | ||
+ | **bathroom walls - add groove for supporting upper beds (5mm in Abet is not enough) | ||
+ | **upper berth SB - cut behind lining, not to be support by stringer | ||
+ | **upper berth SB - add cutout for frame | ||
+ | |||
+ | *missing: | ||
+ | **side porthole cutouts | ||
+ | **escape hatch transom panels (PVC) + sides (15mm 2x white) | ||
+ | **escape hatch cutouts in Vescom panels (size conform Gebo musquito screen) | ||
+ | **basewood for ceiling | ||
+ | |||
− | + | Modifications? | |
− | + | *overhead lockers - hinges on topedge? less forces on hinge | |
− | + | *drawers - plywood drawer box? | |
− | |||
− | * | ||
− | * | ||
− | == | + | == Nesting == |
+ | *Cutter is Ø18 | ||
+ | *Nest edge offset - 5mm | ||
+ | *Nest part offset - 22mm ''but more with corners <90°!, offset contour with 18mm and fillet corners with radius 9 to see cutter path'' | ||
− | + | == Systems == | |
+ | *electric - sleevepipes pass through frames (hole Ø26mm), in insulation | ||
+ | *fresh water piping - pass through frames, in insulation | ||
+ | == Remarks == | ||
− | + | *improvements: | |
+ | **push button latch distance to edge to be the same for doors, drawers, etc. | ||
+ | **furniture door bumpers? | ||
+ | **door overlay is for double overlay, detail for corner cabinet (full overlay?) | ||
[[Category: Projects]] | [[Category: Projects]] |
Latest revision as of 16:34, 6 July 2011
Contents
- 1 General
- 2 Origin
- 3 Material
- 4 Colours
- 5 Upholstery
- 6 Hardware
- 7 Insulation
- 8 Appliances
- 9 Electrical installation
- 10 Sole
- 11 Ceilings
- 12 Port hole boxes and curtain pockets
- 13 Wet units
- 14 Doors
- 15 Part codes
- 16 Remarks Cabin 1 (forepeak)
- 17 Remarks Cabin 2
- 18 Remarks Bathroom 1
- 19 Remarks Salon / Galley
- 20 Remarks Bathroom 2 (aft PS)
- 21 Remarks Bathroom 3 (aft SB)
- 22 Remarks Cabins aft
- 23 Nesting
- 24 Systems
- 25 Remarks
General[edit]
- Yard is Centreboard (HU)
- Lay out A is for the first boat, we have those drawings as a reference, see inbox/00-2D PROJECT X.dwg
- Lay out B is our boat (the second), it is a charter version with 8 berths
- Not all space is used when it is inefficient or hard to reach for use
- Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400
- Yard manager used to draw CNC building kits himself in 2D AutoCad
- Sheets are nested full, if possible move parts to another material in order to obtain this
- Carpenters are supposed to assemble the interior without drawings (only reference are the codes)
- access behind joinery - every space needs to be accessible for cleaning (to remove construction debris which might block bilgepumps)
Origin[edit]
At intersection of DWL and F32
Material[edit]
- Plywood birch 3030x1245mm - density 600 kg/m3
- HPL density - 1.4 kg /m2 for 1mm thickness
- 15mm + 2x HPL 0.75mm draw 17mm
- sole
- furniture
- seats
- 9mm + 2x HPL 0.75mm draw 11mm
- 4mm + 1x HPL 0.75mm (Abet 661) draw 5mm
- lining panels glued to steel construction
- 4mm + 2x HPL 0.75mm draw 6mm
- furniture backpanels
- 15mm + 2x HPL 0.75mm draw 17mm
Colours[edit]
- Abet 661 Micro - walls, lining, furniture bodies
- Abet 313 Nut - furniture doors
- 2x white backing - where no colour is required
- white - all backing
- Vescom is glued with foam on white panel
Upholstery[edit]
- matress thickness 120mm
- sole covering is carpet (loose)
Hardware[edit]
- Hinges
- concealed hinge full overlay - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 220
- concealed hinge inset - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 222
- screw-on cross mounting plate - Hettich System 8099 - Distance 0,0mm - Hettich 9 071 670
- screw-on cross mounting plate - Hettich System 8099 - Distance 5,0mm - Hettich 9 071 673
- Push button - Southco Marine MP-05-H21-F3-K3 (supplier Kroon)
- supplier is Medomat (Ostermann)
Insulation[edit]
- PU foam
- thickness:
- shell 40-50mm
- structure 10mm (can be cut away where necessary)
- in general keep some space between furniture and insulation
Appliances[edit]
- toilet - Planus Sky 560
- heating by Warmteservice Zwolle
- T: 038-467 15 20
- E: zwolle@warmteservice.nl
- contact person (shop manager): Job van Hoogmoed
- convector grill: search on supllier website for 'sierrooster'
Electrical installation[edit]
- see layer '00-E-SCHEMA-24V' and '00-E-SCHEMA-230V'
Sole[edit]
- 4mm rubber above enginer room only, all other sole panels are directly on steel construction
- levels (measured to underside of solepanel):
- foreship DWL -280
- midship DWL +559
- aftship DWL -259
- sole only where necessary, continue 20mm beyond bhd (for 20x20 slat)
- sole stops against wet units
Ceilings[edit]
- 17mm basewood is mounted against all frames (see layer 1-BET-DS*)
- thickness ceiling strips 13mm - see layer '0A-PLAFONDPLATEN'
- aft cabin has an addtional base panel of 9mm because of girders
Port hole boxes and curtain pockets[edit]
- curtain pockets
- depth 75mm
- lining is 8mm and comes with porthole see layer frees Berken Naturel 04 (myst be 8mm)
- porthole boxes
- material of sides is 15mm + 2x HPL 0.75mm (draw 17mm)
- sides to have 10mm overlength at hull side
- porthole panel against steel is 9mm + 2x HPL 0.75mm (draw 11mm)
Wet units[edit]
- completed outside the boat, including sole
- resting directly on the steel
- ceilings are round, 17mm, cuts in top to help bending
- furniture doors
- doors + bulkhead cutouts are rectangular
- door seam is 2mm
- door and bulkhead edge finish is paint
Doors[edit]
Doorleafs (30mm) not in building kit, will be cut by yard
Part codes[edit]
- 5 horizontal layers:
- H1 sole
- H2 intermediary
- H3 seat
- H4 intermediary
- H5 ceiling
- 4 vertical segments:
- V1 on top of H1
- V2 on top of H2
- V3 on top of H3
- V4 on top of H4
- Compartments
- AK aft cabin (achterkajuit)
- VK fore cabin (voorkajuit)
- SH wheelhouse (stuurhuis)
- Furniture
- KN galley (keuken)
- SF settee (sofa)
- Partnumbers
- assigned clockwise
- Layer use in 2D Autocad
- DS = section (doorsnede)
- US = expansion (uitslag)
- ST = steel (staal)
- 2 = layout 2
- FR = frame (spant)
- example: 2-BET-US-AK-WC-H1-01 = Layout 2, BETimmering-UitSlag-AchterKajuit-WC-Vloer H1, deel 01.
Remarks Cabin 1 (forepeak)[edit]
- V-berth with filling piece to make it a double berth
- level berth as layout A, box under bed can be copied (layer 1-BET-US: VK-H2-01, 03 and 04, VK-V1-06, VK-V1-07 and VK-V2-04, see also drawing VK-Agy allat (sounds Hungarian..)
- box under berth should be the same because of battery for bow thruster
- if possible use same wardrobes and shelf as in layout A: 1-BET-US-VK-K3-01 and 03 UPDATE: wardrobes must be modified for layout-A and will not fit in layout-B
- locker in forepeak bhd as in layout-A, this locker has a bottom- forward hinging aftpanel and removable shelf to give access to the chain locker, see dwg VK-OR SZENKRENY K6
- wet unit has 37mm space between wall and 5mm lining to accommodate piping see picture 001 and 007
- forepeak bhd has sleeves to support bookshelves see picture 004 and wardrobe top (is ceiling sidedeck)
Remarks Cabin 2[edit]
- 37mm space aft of wetunit for water connections?
Remarks Bathroom 1[edit]
- copy from layout-A
- see inbox\CD-VK-WC-POL-UNIT.dwg but check those expansions with inbox/00-2D PROJECT X.dwg
Remarks Salon / Galley[edit]
- settee as long as possible, foot end of berth cabin 2 under settee, if not possible than sofa as in layout A (part SF-H3-01)
- seat height is 350mm + 17mm seat panel
- galley 'floats' partly above engine room hatches
- galley parts from layout A can be used again
- galley forward cabinet houses the distribution panel (W550xH750xD182) in the side, parallel to CL (see lay out A SH-K2)
- converter in layout A was in locker with distribution panel, now a new location must be found
- 37mm space aft of wetunit to accommodate water connections?
- frame around aft window is 55mm deep, see picture 009. In front of this a panel 11mm white (will be painted)which stops on top of back of settee, 495 above seat.
- settee back has inspection hatch for connections shower
Remarks Bathroom 2 (aft PS)[edit]
- modifications made by yard, see mail (mail 20-06-2011)
- locker under sink to be lowered 100mm (mail 20-06-2011)
Remarks Bathroom 3 (aft SB)[edit]
- longitudinal length to be reduced by 100mm
- see cabin 3 for position of aft bulkhead
- position for forward bulkhead as layout A
Remarks Cabins aft[edit]
- modify:
- overhead locker enters into ceiling - lower with 6mm (front is OK)
- frame intersects with ceiling - make cutout in ceiling, see layout-A
- ceiling stops against overhead locker front, goes at sides beyond it - see layout-A
- wardrobe shelves are too short, extend with 5
- standard hatch detail: change overlap from 20 to 15
- inclinated sole panels - exterior contour to be parallel with CL
- inclinated sole panels - extend on aft side to allow for 20x20 for supporting wall?
- aft bhd SB - groove for supporting upper bed
- bathroom walls - add groove for supporting upper beds (5mm in Abet is not enough)
- upper berth SB - cut behind lining, not to be support by stringer
- upper berth SB - add cutout for frame
- missing:
- side porthole cutouts
- escape hatch transom panels (PVC) + sides (15mm 2x white)
- escape hatch cutouts in Vescom panels (size conform Gebo musquito screen)
- basewood for ceiling
Modifications?
- overhead lockers - hinges on topedge? less forces on hinge
- drawers - plywood drawer box?
Nesting[edit]
- Cutter is Ø18
- Nest edge offset - 5mm
- Nest part offset - 22mm but more with corners <90°!, offset contour with 18mm and fillet corners with radius 9 to see cutter path
Systems[edit]
- electric - sleevepipes pass through frames (hole Ø26mm), in insulation
- fresh water piping - pass through frames, in insulation
Remarks[edit]
- improvements:
- push button latch distance to edge to be the same for doors, drawers, etc.
- furniture door bumpers?
- door overlay is for double overlay, detail for corner cabinet (full overlay?)