Difference between revisions of "Aventura 34 OC"
From NavykI
Navykisysop (talk | contribs) (→110XX BNX) |
(→ask yard) |
||
| Line 49: | Line 49: | ||
==== ask yard ==== | ==== ask yard ==== | ||
*Jurjen Mulder: remove lg's in way of superstructure front, they are very inconvenient for the interior | *Jurjen Mulder: remove lg's in way of superstructure front, they are very inconvenient for the interior | ||
| − | *Jurjen Mulder: frames foreship - raise to sole level (sole salon minus 600mm) | + | *Jurjen Mulder: frames foreship - raise to sole level (sole salon minus 600mm) - 27-01-2012 contact with Jan Aslander, he says no need for this. |
[[Category: Projects]] | [[Category: Projects]] | ||
Revision as of 13:04, 27 January 2012
THIS BOAT WILL BE RENAMED AVENTURA 34 OC
Contents
General
Contacts
- sales - Aventura Yachts contactperson Bert Meijer
- construction - Bronsveen contactperson Jan Aslander
- construction (subcontractor Bronsveen) - CMS schepen contactperson is Delmer Los
- interior / paintwork - Jurjen Mulder Jacht- en Scheepsbetimmering contactperson Jurjen Mulder
- initial client - boat rental Schultz
Drawing list
- 11002-50-110-B detail construction plan (07-11-2011)
- 11002-50-200-A window plan (07-11-2011)
Questions
To do
11002 BN 1
- done
11015 BN 2
- done
11023 BN 3
Hull
- swimplatform - extend deck aft 400mm, add second deck at an offset of 80mm down (net distance between decks 80mm)
- bottomstringer foreship - make intercoastal DONE (VC)
- ropefender - make strips 50mm wide over nose, from F17 forward, 1 strip at knuckle hull/bulwark, 1 strip at offset 80mm down
Deck
- gaslocker - move from sidedeck to PS cockpitbench, directly aft of superstructure bulkhead, no hatch detailing (yard will make alu hatch)
- cockpit benches - add 2 short hatches in benches against transom, height as hatches in side benches
Superstructure
- superstructure aft bulkhead - move aft 150mm (modify windows?), remove vertical 'roof extension' aft of windows, we can decide if roof extension over cockpit will remain or not
- deck hatch forepeak - make cutout in roof 4mm bigger to accommodate vertical FB 30x4 (hatch base about 10-15mm above roof) DONE (VC) BUT it must be changed again: deckhatch will be mounted on top of L50x50x5 profiles with flanges pointing inward
- deck hatch salon - mark HIP for sliding hatch Webasto serie 60 (HIP should be about 1100x1800)
Miscelaneous
- engine - move aft
- nest - add remark for cutter - 'platen op holle zijde markeren'
110XX BNX
- mark lower swimplatform deck on transom
- cut FB50x5 from plate?
- cockpit hatches - cut at correct size
- Jurjen Mulder: salon entrance cutout: add detail on construction plan (bhd stiffeners are in different position per boat)
- Jurjen Mulder: shower is enlarged aftward
- Jurjen Mulder: bottom frames iwo toilet/shower - reduce height?
ask yard
- Jurjen Mulder: remove lg's in way of superstructure front, they are very inconvenient for the interior
- Jurjen Mulder: frames foreship - raise to sole level (sole salon minus 600mm) - 27-01-2012 contact with Jan Aslander, he says no need for this.
