Difference between revisions of "15038 Bestevaer 45 ST Pure"
From NavykI
(→General) |
(→Superstructure) |
||
| Line 38: | Line 38: | ||
====Superstructure==== | ====Superstructure==== | ||
| − | |||
*Base ceiling | *Base ceiling | ||
**split for sheet size | **split for sheet size | ||
| Line 44: | Line 43: | ||
***narrow lower width | ***narrow lower width | ||
***remove round corners in FC | ***remove round corners in FC | ||
| + | |||
====Sole structure==== | ====Sole structure==== | ||
*finalize | *finalize | ||
Revision as of 15:06, 7 August 2015
'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).
Contents
Planning
- Conform mail Willem Berends of July 16
- WK 30 Navyk to implement all comments and changes.
- WK 30 End of the week Navyk will send the draft files for review.
- WK 32 Bamboo wood will be delivered to KMY for surface preparations.
- WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
- WK 34 All wood material (exl. floor) will be deliverer at CNC works.
- WK 34 End of this week Navyk will deliver the complete files to KMY.
- WK 35 CNC will cut all materials en deliver to the KMY.
TO DO
Solid model
General
- Heating > make all outlets, route?
- Drawers > propose
- Solid profile ceiling/lining
- access bolt connection for mounting superstructure > only problem in way of bathroom
Sole
- Finish sole > add radi in way of solid profiles
Forecabin
Salon
- table > KMY > hardware, modify top?
Galley
Bathroom
Aft ship
- high locker > add hatch in back for access technique
- Guest Cabin
- update solid profiles (L/U)
- Deckhouse
- stairs > storage
- handrail SB > to model
- handrail/pillar PS > to model
Superstructure
- Base ceiling
- split for sheet size
- Moulding deck/hull
- narrow lower width
- remove round corners in FC
Sole structure
- finalize
Other files
- labels > create excel sheet with codes for each part
- additional files:
- Marlan templates
- Metal parts (?):
- handrails
- 'Aft cabins' renamed into 'Aft ship'
General
- push button > knob can be rotated 90° or 180°?
- heating
- outlets > HIP?
- accesoires?
Sole
- sole hatches in furniture will have fingerhole or Southco hardware?
Fore cabin
- bed > bottom of storage is OC-18
- bed > hatch for access mast bhd bolts?
- bed > batteries > additional bottom panel with battery cutouts could have cutouts for nylon straps to fasten the batteries
- lining > in way of sole the lining could be replaced by bracket boxes
- lining/ceiling > intersecting frames/faceplates are ignored
Deckhouse
- aft lining > space behind > make storage? (behind armrest)
- aft lining > add hatch for access welding of aft bulkhead?
Galley
- fridge vent in plinth interferes with LED light
- fridge vent in cabinet side to be => 6500mm2 > apply Hafele grill?
- sole > large opening (no hatch) under galley counter
Bathroom
- full cabin assembled outside boat
- heating hose to be installed prior to positioning cabin
- glass doors are very close to shower mixer
- black water tank...
- superstructure bolts > no access
Salon
- benches > please indicate hatches
- upper locker PS fore > add hatch in back for access technique?
- table
- folding leave hardware Kroon 342114 > non existing article code?
- specified panel clips > for what use?
Superstructure
- Skyscreen > with liner?
Aluminum
- aft ship > move stiffener under cockpit porthole to CL side of bhd?
INFO
General
- driver-drill
- total length including bit > 210mm
- distance shaft center to top of housing > 36mm
hatches and portlights
- Deckhatches:
- Lewmar Size 60 low profile: 39960030
- Lewmar Size 30 low profile: 39930030
- Portligths in superstructure:
- Lewmar Standard portlight Size 3: 393320200
- Portlights in cockpit:
- Lewmar Standard portlight Size 5: 393520200
hardware
- finish > stainless steel
lining
- V-grooves, every 100mm, parallel to deckline/sheer
ceilings
- leather panels > mounted with Fastmount
entrance doors
- door width net standard > 560mm
- door width net minimum > 500mm
- gap under door > ?
- core > plywood ocoume 18mm
- cover panels > plywood bamboo 7mm
- hinges?
- mortise lock?
- handles?
- door plates/shields?
- height doorhandles?
- door catch?
- ajar hook?
lockers
- shelves > mounted with shelf supports (Hettich)
- FYI > solid corner profiles in furniture plintes will be painted white
- hinges > Hettich Intermat Soft....
- drawer runners > Hettich Quadro 30
- closing device > Kroon 372369
- shelf supports
seats
- seat cushion thickness 100mm
- back vertical
- seat panel 340mm above sole
berths
- matrass thickness 100mm
- bed slats 40 mm from Spacerflex
Sole
- base > 18mm ocoume, varnished all around
- finish > chest nut
- margin boards > width 70mm
- hatch locking device > see material list
Fore Cabin
Salon
- lower hinge in forward upper cabinet will be solved by KMY
Galley
- resize and reposition all drawer boxes conform final drawer runner
- fridge is a Webasto
- CR 85 EL - first choice
- CR 65 EL - second choice
- front to be white
- sink > Belship 0430331515CS
- stove > Force 10 F63356
- gimbal 30°
- faucet > Damixa Willow Kitchen Chrome
Bathroom
- black water tank > behind toilet, 2 options:
- glass doors > semi standard product
- sink > Belship 043018
- faucet > [ http://www.badkamerwinkel.nl/damixa-willow-wastafelkraan-met-klik-waste-chroom-358210000 Damixa Willow Bathroom faucet chrome]
- showermixer > Damixa Willow Showermixer chrome
- shower head > Damixa hand shower chrome
Aft cabins
- entrance door > rotates inside
Deck house
Superstructure
- Skyscreen > model to be determined > KMY
Modeling refereneces
Tolerance
- distance to frame flanges 20
Lining
- deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)
Base ceiling
- superstructure
- offset 58 from inside shell
- after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
- interference with stringers <2, to be solved on board
Sheet estimation
transverse grain
- 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
- 6mm single bamboo - 1 sheet - bench fronts DH
Milling
- Subcontracted to CNC werk
- Router bits Ø10 and Ø20
- Questions
- contours > layer for each bit diameter?
- drilling holes > layer for each diameter + depth?
- Labels > 3 lines is possible? (ID, sheet ID, material ID)
- drilling holes > mark with cross or circle of correct diameter?
Aluminum
- mast bulkhead > bolted? requires hatch in bed
- mast bulkhead > cutout entrance door + heater hose
- aft bulkhead > cutout for heater hose
- galley > pillar
- bolt connection > create detail
People
- Eeuwe Kooi - director/owner (not directly involved)
- Willem Berends - chain manger (responsible for contract)
- Willem-Jan van der Vegt - engineer (our contactperson)
- Haaie Andringa - foreman carpentry
Exchange work
- KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
- integration of heater ducting is not in contract
- info is not delivered on Monday, June 15 but came partially on June 16 and 17
As discussed
July 1, 2015
- furniture doors - 17mm is OK
- entrance hatch recess box - PUR insulated, put plywood panel in front
- stair steps solid wood
- cockpit sole - covered with cork 9mm
- lining - leather panels are canceled
- porthole boxes - yard makes tube, out of our delivery
June 16, 2015
- black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet
June 11,2015
- tolerances
- vertical:
- sole to supporting structure - 0mm
- ceiling to structure - 0mm
- horizontal
- clearance from inner frame contour - 20mm (space between frames is reserved for systems)
- vertical:
- insulation type is PUR
- grain orientation will be vertical
- sole supports are alu tube 50x30x?
- cabinet interiors to be white
- KMY workshop facilities:
- no veneer press
- edge band machine for straight edges
- lamello machine
- round router bits R6, R8, R10, R12
- Navyk will route the ducting for airheating through the interior
- Navyk is free to use their own material naming
- Navyk will give a price offer for the aluminium sole supports
Structure model - modifications!
- Forepeak bulkhead - stiffeners will be on aft side (cabin side)
- Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
- Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
- sole structure - to be determined, Navyk will make a price offer for this
