Difference between revisions of "CNC remarks KMY"
From NavykI
(→Navyk) |
|||
| Line 5: | Line 5: | ||
*lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues | *lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues | ||
*grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company) | *grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company) | ||
| − | *technical hatches | + | *technical hatches |
| + | **replace half overlap with ring? | ||
| + | **conform JanW it is perfect for SN40 | ||
| + | **try first with machine setting from table instead of top of material? | ||
| + | **KMY might prefer to give hatch and HIP an edgeband and then a counterring is the only option and the problem is solved too | ||
*cutouts portholes and deck hatches > edgeband applied, so increase cutout | *cutouts portholes and deck hatches > edgeband applied, so increase cutout | ||
| − | *base panels portholes and deck hatches > 4mm cork applied | + | *base panels portholes and deck hatches > 4mm cork applied |
| − | |||
== KMY == | == KMY == | ||
Revision as of 15:03, 30 October 2015
Contents
- material estimation / BOM
- must inidicate clearly the quality of the panel 'sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'
- groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB)
- lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues
- grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company)
- technical hatches
- replace half overlap with ring?
- conform JanW it is perfect for SN40
- try first with machine setting from table instead of top of material?
- KMY might prefer to give hatch and HIP an edgeband and then a counterring is the only option and the problem is solved too
- cutouts portholes and deck hatches > edgeband applied, so increase cutout
- base panels portholes and deck hatches > 4mm cork applied
KMY
- use larger panels 3050x1550? no split parts, less waste?
Material supplier
- sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)
Milling
- delivery
- deliver parts sorted per group (not done for Pure)
- deliver small parts seperated from panel (not yard to remove the small parts out of the panel)
- issues
- drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed)
[Category: Interior]
