Difference between revisions of "CNC milling"
From NavykI
(→15038 BV 45ST Pure) |
|||
Line 16: | Line 16: | ||
== 15038 BV 45ST Pure == | == 15038 BV 45ST Pure == | ||
− | *Milled by [http://www.cncwerk.nl/CNC werk] | + | *Milled by [http://www.cncwerk.nl/ CNC werk] |
== 15057 Primaat 12m == | == 15057 Primaat 12m == | ||
*Milled by [http://www.issos.nl/ Issos] | *Milled by [http://www.issos.nl/ Issos] |
Revision as of 15:12, 17 December 2015
13012 Dykstra 62
- File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple)
- Milled by Marron
- Programmer > Mr. Ranga, with a background in CNC micro processing of metal
- Software > Maestro
- Router bit for outside contours > Ø8, 18.000 RPM, 6 meter/minute
- Arguments for small toolbit:
- less vacuum loss
- tool life is no issue for wood
- Arguments for small toolbit:
- remarks
- in theory lines/arcs should not be smaller then radius of router bit
- depending on software it will create problems or not
- as a test Mr. Ranga ran with Ø80 bit around contour with 9mm step in it without errors
- lines/arcs should also be larger then machine displacement (depending on machine displacement the milling contours are divided in steps, can be adjusted in machine parameters)
15038 BV 45ST Pure
- Milled by CNC werk
15057 Primaat 12m
- Milled by Issos