Difference between revisions of "Material Properties"

Revision as of 11:18, 11 June 2009

@@ Line 1: / Line 1: @@
-Material properties
+== Material properties ==
+=== Stainless steel ===
-Stainless steel
+{|
+|Property
-Type 316
+|Units
-Property                   Units  Typical  Type 316  Type 316L
+|Typical
-Ultimate Tensile Strength, [ksi]   85       75 min    70 min
+|Type 316
-.2% Offset Yield Strength,[ksi]   44       30 min    25 min
+|Type 316L
-Elongation in 2 inches,    [%]     56       40 min    40 min
+|-
-Reduction in Area,         [%]     69        —         —
+|Ultimate Tensile Strength
-Hardness, Rockwell B               81       95 max    95 max
+|[ksi]
+|85
-Density, lb/in3 7 888.77
+|75 min
-Modulus of Elasticity, psi 29 x 106
+|70 min
-Coefficient of Thermal Expansion, 68-212°F, /°F 8.9 x 10-6
+|-
-Thermal Conductivity, Btu/ft hr°F 8.7
+|0.2% Offset Yield Strength
-Heat Capacity, Btu/lb°F 0.12
+|[ksi]
-Electrical Resistivity, W-inch 29.5 x 10-6
+|44
+|30 min
+|25 min
+|-
+|Elongation in 2 inches
+|[%]
+|56
+|40 min
+|40 min
+|-
+|Reduction in Area
+|[%]
+|69
+| —
+| —
+|-
+|Hardness, Rockwell
+|[B]
+|81
+|95 max
+|95 max
+|-
+|Density
+|[Kg/m^3]
+|7 888.77
+| —
+| —
+|-
+|Modulus of Elasticity
+|[psi]
+|29 x 10^6
+| —
+| —
+|-
+|}