Difference between revisions of "Finite Element Method"
From NavykI
| Line 6: | Line 6: | ||
Also MATHLAB developed a module for FEA which also uses programing capabilities of MATHLAB for optimization and different loading cases on the same analysis. | Also MATHLAB developed a module for FEA which also uses programing capabilities of MATHLAB for optimization and different loading cases on the same analysis. | ||
| + | ==Material properties== | ||
| + | |||
| + | *Aluminium | ||
| + | **Density (near r.t.) 2700 Kg/cm^3 | ||
| + | **Young's modulus 70 GPa | ||
| + | **Shear modulus 26 GPa | ||
| + | **Poisson ratio 0.35 | ||
[[Category: Marine Engineering]] [[Category: Naval Architecture]] | [[Category: Marine Engineering]] [[Category: Naval Architecture]] | ||
Revision as of 14:46, 11 December 2009
Abbreviation for Finite Element Method, sometimes referred to as Finite Element Analysis or FEA.
Most well known FEM applications are COSMOS and FEMAP.
Still the best remains ANSYS.
Also MATHLAB developed a module for FEA which also uses programing capabilities of MATHLAB for optimization and different loading cases on the same analysis.
Material properties
- Aluminium
- Density (near r.t.) 2700 Kg/cm^3
- Young's modulus 70 GPa
- Shear modulus 26 GPa
- Poisson ratio 0.35
