Difference between revisions of "11014 Aventura 43"

From NavykI
Jump to: navigation, search
(New page: == General == *Yard is [http://www.centreboard.eu Centreboard (HU)] *Lay out A is for the first boat, we have those drawings as a reference, see ''inbox/00-2D PROJECT X.dwg'' *Lay out B i...)
(No difference)

Revision as of 10:34, 9 July 2011

General

  • Yard is Centreboard (HU)
  • Lay out A is for the first boat, we have those drawings as a reference, see inbox/00-2D PROJECT X.dwg
  • Lay out B is our boat (the second), it is a charter version with 8 berths
  • Not all space is used when it is inefficient or hard to reach for use
  • Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400
  • Yard manager used to draw CNC building kits himself in 2D AutoCad
  • Sheets are nested full, if possible move parts to another material in order to obtain this
  • Carpenters are supposed to assemble the interior without drawings (only reference are the codes)
  • access behind joinery - every space needs to be accessible for cleaning (to remove construction debris which might block bilgepumps)

Origin

At intersection of DWL and F32

Material

  • Plywood birch 3030x1245mm - density 600 kg/m3
  • HPL density - 1.4 kg /m2 for 1mm thickness
    • 15mm + 2x HPL 0.75mm draw 17mm
      • sole
      • furniture
      • seats
    • 9mm + 2x HPL 0.75mm draw 11mm
    • 4mm + 1x HPL 0.75mm (Abet 661) draw 5mm
      • lining panels glued to steel construction
    • 4mm + 2x HPL 0.75mm draw 6mm
      • furniture backpanels

Colours

  • Abet 661 Micro - walls, lining, furniture bodies
  • Abet 313 Nut - furniture doors
  • 2x white backing - where no colour is required
  • white - all backing
  • Vescom is glued with foam on white panel

Upholstery

  • matress thickness 120mm
  • sole covering is carpet (loose)

Hardware

  • Hinges
    • concealed hinge full overlay - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 220
    • concealed hinge inset - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 222
    • screw-on cross mounting plate - Hettich System 8099 - Distance 0,0mm - Hettich 9 071 670
    • screw-on cross mounting plate - Hettich System 8099 - Distance 5,0mm - Hettich 9 071 673
  • Push button - Southco Marine MP-05-H21-F3-K3 (supplier Kroon)
  • supplier is Medomat (Ostermann)

Insulation

  • PU foam
  • thickness:
    • shell 40-50mm
    • structure 10mm (can be cut away where necessary)
  • in general keep some space between furniture and insulation

Appliances

  • toilet - Planus Sky 560
  • heating by Warmteservice Zwolle
    • T: 038-467 15 20
    • E: zwolle@warmteservice.nl
    • contact person (shop manager): Job van Hoogmoed
    • convector grill: search on supllier website for 'sierrooster'

Electrical installation

  • see layer '00-E-SCHEMA-24V' and '00-E-SCHEMA-230V'

Sole

  • 4mm rubber above enginer room only, all other sole panels are directly on steel construction
  • levels (measured to underside of solepanel):
    • foreship DWL -280
    • midship DWL +559
    • aftship DWL -259
  • sole only where necessary, continue 20mm beyond bhd (for 20x20 slat)
  • sole stops against wet units

Ceilings

  • 17mm basewood is mounted against all frames (see layer 1-BET-DS*)
  • thickness ceiling strips 13mm - see layer '0A-PLAFONDPLATEN'
  • aft cabin has an addtional base panel of 9mm because of girders

Port hole boxes and curtain pockets

  • curtain pockets
    • depth 75mm
    • lining is 8mm and comes with porthole see layer frees Berken Naturel 04 (myst be 8mm)
  • porthole boxes
    • material of sides is 15mm + 2x HPL 0.75mm (draw 17mm)
    • sides to have 10mm overlength at hull side
    • porthole panel against steel is 9mm + 2x HPL 0.75mm (draw 11mm)

Wet units

  • completed outside the boat, including sole
  • resting directly on the steel
  • ceilings are round, 17mm, cuts in top to help bending
  • furniture doors
    • doors + bulkhead cutouts are rectangular
    • door seam is 2mm
    • door and bulkhead edge finish is paint

Doors

Doorleafs (30mm) not in building kit, will be cut by yard

Part codes

  • 5 horizontal layers:
    • H1 sole
    • H2 intermediary
    • H3 seat
    • H4 intermediary
    • H5 ceiling
  • 4 vertical segments:
    • V1 on top of H1
    • V2 on top of H2
    • V3 on top of H3
    • V4 on top of H4
  • Compartments
    • AK aft cabin (achterkajuit)
    • VK fore cabin (voorkajuit)
    • SH wheelhouse (stuurhuis)
  • Furniture
    • KN galley (keuken)
    • SF settee (sofa)
  • Partnumbers
    • assigned clockwise


  • Layer use in 2D Autocad
    • DS = section (doorsnede)
    • US = expansion (uitslag)
    • ST = steel (staal)
    • 2 = layout 2
    • FR = frame (spant)
  • example: 2-BET-US-AK-WC-H1-01 = Layout 2, BETimmering-UitSlag-AchterKajuit-WC-Vloer H1, deel 01.

Remarks Cabin 1 (forepeak)

  • V-berth with filling piece to make it a double berth
  • level berth as layout A, box under bed can be copied (layer 1-BET-US: VK-H2-01, 03 and 04, VK-V1-06, VK-V1-07 and VK-V2-04, see also drawing VK-Agy allat (sounds Hungarian..)
  • box under berth should be the same because of battery for bow thruster
  • if possible use same wardrobes and shelf as in layout A: 1-BET-US-VK-K3-01 and 03 UPDATE: wardrobes must be modified for layout-A and will not fit in layout-B
  • locker in forepeak bhd as in layout-A, this locker has a bottom- forward hinging aftpanel and removable shelf to give access to the chain locker, see dwg VK-OR SZENKRENY K6
  • wet unit has 37mm space between wall and 5mm lining to accommodate piping see picture 001 and 007
  • forepeak bhd has sleeves to support bookshelves see picture 004 and wardrobe top (is ceiling sidedeck)

Remarks Cabin 2

  • 37mm space aft of wetunit for water connections?

Remarks Bathroom 1

  • copy from layout-A
  • see inbox\CD-VK-WC-POL-UNIT.dwg but check those expansions with inbox/00-2D PROJECT X.dwg

Remarks Salon / Galley

  • settee as long as possible, foot end of berth cabin 2 under settee, if not possible than sofa as in layout A (part SF-H3-01)
  • seat height is 350mm + 17mm seat panel
  • galley 'floats' partly above engine room hatches
  • galley parts from layout A can be used again
  • galley forward cabinet houses the distribution panel (W550xH750xD182) in the side, parallel to CL (see lay out A SH-K2)
  • converter in layout A was in locker with distribution panel, now a new location must be found
  • 37mm space aft of wetunit to accommodate water connections?
  • frame around aft window is 55mm deep, see picture 009. In front of this a panel 11mm white (will be painted)which stops on top of back of settee, 495 above seat.
  • settee back has inspection hatch for connections shower

Remarks Bathroom 2 (aft PS)

  • modifications made by yard, see mail (mail 20-06-2011)
  • locker under sink to be lowered 100mm (mail 20-06-2011)

Remarks Bathroom 3 (aft SB)

  • longitudinal length to be reduced by 100mm
  • see cabin 3 for position of aft bulkhead
  • position for forward bulkhead as layout A

Remarks Cabins aft

  • modify:
    • overhead locker enters into ceiling - lower with 6mm (front is OK)
    • frame intersects with ceiling - make cutout in ceiling, see layout-A
    • ceiling stops against overhead locker front, goes at sides beyond it - see layout-A
    • wardrobe shelves are too short, extend with 5
    • standard hatch detail: change overlap from 20 to 15
    • inclinated sole panels - exterior contour to be parallel with CL
    • inclinated sole panels - extend on aft side to allow for 20x20 for supporting wall?
    • aft bhd SB - groove for supporting upper bed
    • bathroom walls - add groove for supporting upper beds (5mm in Abet is not enough)
    • upper berth SB - cut behind lining, not to be support by stringer
    • upper berth SB - add cutout for frame
  • missing:
    • side porthole cutouts
    • escape hatch transom panels (PVC) + sides (15mm 2x white)
    • escape hatch cutouts in Vescom panels (size conform Gebo musquito screen)
    • basewood for ceiling


Modifications?

  • overhead lockers - hinges on topedge? less forces on hinge
  • drawers - plywood drawer box?

Nesting

  • Cutter is Ø18
  • Nest edge offset - 5mm
  • Nest part offset - 22mm but more with corners <90°!, offset contour with 18mm and fillet corners with radius 9 to see cutter path

Systems

  • electric - sleevepipes pass through frames (hole Ø26mm), in insulation
  • fresh water piping - pass through frames, in insulation

Remarks

  • improvements:
    • push button latch distance to edge to be the same for doors, drawers, etc.
    • furniture door bumpers?
    • door overlay is for double overlay, detail for corner cabinet (full overlay?)
Retrieved from "http://navyki.navyk.ro/index.php?title=11014_Aventura_43&oldid=2270"