Difference between revisions of "10001 MS Albatros"

Revision as of 15:36, 31 August 2011

To do

• ON update weight calculation/hydrostatics for situation at launching
• drawings:
  • boarding ladder
  • pasarelle
  • removable table on windlass gear casing
  • design exterior furniture (chairs foredeck)
  • provisions for lowering mast with their own hoists
  • update GA
  • bilge foreship - frame for storage boxes
  • sole - add hatches inside WH console
  • ventilation - technical space - combine with cowl at bench?
  • miscelaneous details - update funnel mast for additional antenna's and light
  • bench wheelhouse front - center hatch: larger gas springs (200N)?
• spreader lights - Aqua Signal Lubeck
• furniture drawings - ceder veneer
• interior door stoppers
• material orders:
  • rubber stairs profile?

Hotwork or steel cutting to be done

• ER air intakes - drains
• funnel - L-profile firedamper + support morse cable
• aftdeck - shower
• flagpole - support
• filling stations - locking device
• SOS locker - locking device
• screwed on
  • lifebuoys
  • doorholders (order for salon)

Sending furniture drawings to Albatros team

• remove WIP from the file name
• make the drawing 'read only'
• update the Albatros drawing list (Google document)
• put PDF on FTP (when it concerns an update, delete the old PDF from FTP)
• send PDF to Ionut Melescanu and CC to Steven - subject Albatros - furniture drawing new or Albatros - furniture drawing update
• if the drawing has electrical connections / appliances than send also the DWG file to Ionut Melescanu (contactperson RETEC)
• print drawing on A4 colour and put in Albatros file

Hydrostatics

launching 8 july 2011

• 62 tons - weight in crane
• Waterline measurements:
  • Fore-> 340mm under the XVI draft mark
  • Aft -> 360mm under the XX draft mark

Outfitting

Passarelle

• 24V actuator
• length
  • base about 2000
  • extension about 1500
• for examples see Besenzoni