Difference between revisions of "SC Hull"
From NavykI
Line 1: | Line 1: | ||
== Templates == | == Templates == | ||
− | Templates are | + | Templates are required for plates which need mechanical processing to obtain the desired shape. |
Line 12: | Line 12: | ||
'''Template types''' | '''Template types''' | ||
*''Bow Fashion'' - for plates which are on the center line and have symmetry around the center line (for example a bow cone) | *''Bow Fashion'' - for plates which are on the center line and have symmetry around the center line (for example a bow cone) | ||
− | *''Standard'' - all other plates | + | *''Standard'' - all other plates: |
+ | **Create the templates on the ''reference lines'', as perpendicular to the surface as possible, or if this is not applicable: | ||
+ | **Use ''Auto-Level'' | ||
− | + | '''Template name''' is ''plate name + reference line name'' or, when using ''Auto-Level'', ''plate name + T1 (T2, T3, etc.)'' | |
− | |||
− | |||
− | '''Template name''' is ''plate name + reference line name'' or, when using Auto-Level, ''plate name + T1 (T2, T3, etc.)'' |
Revision as of 15:30, 3 April 2009
Templates
Templates are required for plates which need mechanical processing to obtain the desired shape.
We need templates in the following situations:
- Single curvature (bending) with constant radius - no template required, give bending info on plate.
- Single curvature (bending) without constant radius - 1 template required.
- Double curvature (forming) - minimum 3 templates required.
Template types
- Bow Fashion - for plates which are on the center line and have symmetry around the center line (for example a bow cone)
- Standard - all other plates:
- Create the templates on the reference lines, as perpendicular to the surface as possible, or if this is not applicable:
- Use Auto-Level
Template name is plate name + reference line name or, when using Auto-Level, plate name + T1 (T2, T3, etc.)