Difference between revisions of "SC Hull"
From NavykI
| Line 20: | Line 20: | ||
**Create the templates on the ''reference lines'', as perpendicular to the surface as possible, or if this is not applicable: | **Create the templates on the ''reference lines'', as perpendicular to the surface as possible, or if this is not applicable: | ||
**Use ''Auto-Level'' | **Use ''Auto-Level'' | ||
| + | |||
| + | |||
| + | '''Template label''' | ||
| + | *Plate Name | ||
| + | *Marking Line Name | ||
| + | *Bracket Angle | ||
'''Template name''' is ''plate name + reference line name'' or, when using ''Auto-Level'', ''plate name + T1 (T2, T3, etc.)'' | '''Template name''' is ''plate name + reference line name'' or, when using ''Auto-Level'', ''plate name + T1 (T2, T3, etc.)'' | ||
| + | |||
| + | |||
| + | '''Edge margin''' 50mm | ||
Revision as of 13:56, 7 April 2009
Surfaces and expansions
How to position in the drawing
Templates
Templates are required for plates which need mechanical processing to obtain the desired shape.
We need templates in the following situations:
- Single curvature (bending) with constant radius - no template required, give bending info on plate.
- Single curvature (bending) without constant radius - 1 template required.
- Double curvature (forming) - minimum 3 templates required.
Template types
- Bow Fashion - for plates which are on the center line and have symmetry around the center line (for example a bow cone)
- Standard - all other plates:
- Create the templates on the reference lines, as perpendicular to the surface as possible, or if this is not applicable:
- Use Auto-Level
Template label
- Plate Name
- Marking Line Name
- Bracket Angle
Template name is plate name + reference line name or, when using Auto-Level, plate name + T1 (T2, T3, etc.)
Edge margin 50mm
