Difference between revisions of "Nesting - preparing for CNC"

Revision as of 10:29, 22 May 2009

When the nest drawings are approved they need to be prepared for NC-Pyros.

example: 08007-05 Nests CNC

example: 08007-B10-Nest PL04 Steel S5

example: 08007-B10-Nest PL04 Steel S5 rev 1

The drawing is now ready for NC-Pyros.

@@ Line 1: / Line 1: @@
-When the nest drawings are approved they need to be prepared for CNC cutting.
+When the nest drawings are approved they need to be prepared for [[NC-Pyros]].
-#Create a new folder with the ''project name'' and add ''Nests CNC''.
+*Create a new folder with the ''project name'' and add ''Nests CNC''.
 ::example: ''08007-05 Nests CNC''
-#Copy the nest files from the ShipConstructor Nests folder into the new folder.
+*Copy the nest files from the ShipConstructor Nests folder into the new folder.
-#Rename the files.
+*Rename the files.
 ::example: ''08007-B10-Nest PL04 Steel S5''
-#Hide layer ''stock''.
+*Revisions are indicated by adding ''rev 1''.
-#Use ''Quick Select'' to filter all blocks and explode them, repeat this if necessary until all blocks are gone
+::example: ''08007-B10-Nest PL04 Steel S5 rev 1''
-#Check if all entities are on layer ''_PRD''.
+*Hide layer ''stock''.
-#Use Quick Select to find all ARL entities, explode them.
+*Use ''Quick Select'' to find all part blocks and explode them.
-#Remove all vertices, tolerance 0.05.
+*Use ''Quick Select'' to find all ARL entities and explode them.
+*Check if all entities are on layer ''_PRD''.
+*Remove all vertices, tolerance 0.05.
-The drawing is now ready for CNC cutting.
+The drawing is now ready for NC-Pyros.
+[[Category:Marine Engineering]] [[Category:ShipConstructor]]