Difference between revisions of "14004 Floatel"
From NavykI
Navykisysop (talk | contribs) (→Meeting notes) |
|||
| Line 88: | Line 88: | ||
*load for strength calculation to be determined by Linskens | *load for strength calculation to be determined by Linskens | ||
| + | |||
| + | ===Questions=== | ||
| + | *aluminum sheet dimension | ||
| + | *will we have any cnc | ||
| + | *black water tank final dimensions | ||
| + | *position for technical space | ||
| + | *through hull pipe dimensions | ||
[[Category: Projects]] | [[Category: Projects]] | ||
Revision as of 12:57, 26 February 2014
Contents
General
- yard budget for developing and building 1st hull €35.000 (Floating 44 was €20.000, Comforship was €40.000 (done by Michiel van Vossen))
- Material - aluminum
- CE Category C (required by marina's)
- floating hotel room, will never leave it's berth after mooring
- Hull - as cheap as possbile to produce (combination of smart engineering, material reduction and labor reduction)
- Floating 44 (project 13006):
- displacement 14 tons
- floating at DWL
- trim aft 40mm
- transverse cross stiffeners removed
- see dwg P:\Offers\14004 Houseboat\Final draw
Scope
- NA/calculations (total 128h)
- hydrostatics/weight estimation(interpolation/construction) (40h)
- intact stability (16h)
- damaged stability (32h)
- roof strength (24h)
- glass thickness (8h)
- frame strength (8h)
- ME (total 132h)
- building kit (120h)
- additional construction details (12h)
Additional
- 7 superstructure frames (5 onder, 2 boven)
- hatch hull
- NO railing
- NO stairs interior
- NO stairs exterior
- NO 'kraaiennest'
- bridge connection
- calculate influence of filled whirlpool on heel
Meeting notes
- 20-Feb by phone:
- glass at sides to be 8mm tempered monolythic (exterior pane)
- other glass to be 4-16-4
- 8 persons to be considered for stability
- Peter will inform if boat needs to be sailing or not for CE approval
- BOA 4980mm for roadtransport (including wooden sideplanking)
- sceptic tank Afmitech Bever Combi Compact
- contact person Jan Boede de Jong
- tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible
- bench and bathing platform to be removable for this purpose
- hull fixtures by Navyk
- insulated and heated drain hose for whirlpool Ø80mm
- Dual Docker removable mounting plates by Navyk
- removable cleats by Navyk (see pictures)
- wooden planking
- Lariks 28mm
- beams H60mm
- bathing area in front of bench
- alu grills on alu structure
- grills tbd by Linskens
hull construction
- bended sheets 3x2m
- on top 21mm wide flanges
- bottom slightly rounded for additional stifness (10mm)
- bow
- rectangular in planview
- sloped in sideview
- all tubes rectangular 120x60
- cut out in tubes for draining rainwater from deck
- 70mm distance between platform beams and deck
- NO double transom (Floating 44)
- technical space
- in SB hull
- access hatch CO 500x500
- space position by Niels
- pipe through hull in way of whirlpool for drainpipe?
- bridge connection
- top of wooden planking in line with interior sole
house
- roof of sandwich panel (Kingspan Unidek):
- faces 12mm chipboard P5 or P7
- ESP core, thickness as desired
- wooden ribs (pine), width as desired
- wooden ribs at 450 COC (can probably be customized too)
- maximum panel length 8500
- beams are in longitudinal direction
- side walls
- load for strength calculation to be determined by Linskens
Questions
- aluminum sheet dimension
- will we have any cnc
- black water tank final dimensions
- position for technical space
- through hull pipe dimensions
