Difference between revisions of "15012 pontoon AMS"

From NavykI
Jump to: navigation, search
(Created page with "*Pontoon width to be extended with 2m at centerline *Deck load 2 ton/m2 minimum *Fenders - at deck edge eyes for mounting car tires *Container fixing points - Twistlocks and s...")
 
Line 1: Line 1:
−
*Pontoon width to be extended with 2m at centerline
+
*Pontoon to be suitable for use in oil ports (regulations)
−
*Deck load 2 ton/m2 minimum
 
−
*Fenders - at deck edge eyes for mounting car tires
 
−
*Container fixing points - Twistlocks and subframes for 2 container units of 5.50m length, placed transverse on deck
 
−
*At every corner of pontoon 2 bollards
 
−
*Coupling winches at aft deck
 
−
*Suction box for watersuction of fifi container suitable for flow of 23m3/minute. Suction box to have removable water inlet grills. Idea is to have a box which can be lowered beneath the bottom with 2 worm winches
 
−
*Pontoon to have day- and night signals conform BPR
 
−
*Deck lights for save working during night
 
  
  
 +
*Construction
 +
**width to be extended by 2m at CL
 +
**deck load 2 ton/m2 minimum
 +
**aftship to have recess for receiving bow of pushboat
 +
**2 coupling winches at aftdeck, minimum 500mm from boat side, about 10 ton per winch
 +
**hatches of sufficient size for each compartment with coaming 500mm height
 +
 +
*Suction box
 +
**water intake box for fifi container suitable for flow rate 23m3/minute
 +
**suction box to have removable water inlet grills
 +
**idea is to have a box which can be lowered beneath the bottom with 2 worm winches
 +
 +
*Railing and safety
 +
**at longitudinal sides a horizontal pipe Ø80-100 thickwalled, about 150mm above deck, stanchions every 1500mm, on top of it the railing, total height to be 1m
 +
**deck to have non skid strips
 +
**everything conform regulations
 +
 +
*Container(s)
 +
**twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon
 +
**frames for containers and generator to be heavy and with flexible mounts, if necessary with reinforced construction below deck, to avoid pontoon becoming a resonance box.
 +
 +
 +
*Fuel tanks
 +
**total capacity 9 ton
 +
**2 tanks H1000, W1500, length to be determined by Navyk
 +
**crossover
 +
**tanks to have a gauge glass
 +
**tanks to have a BOBS system ([http://www.x-bob.nl X-BOB])
 +
**fill station conform regulations
 +
 +
 +
*Mooring and anchoring
 +
**2 bollards at every corner (I suggest we keep existing 6 bollards)
 +
**bollards to be non skid (by means of welding points)
 +
**bollards to be checked with regulations (reinforcement required below deck?)
 +
**fenders - at deck edge eyes for mounting car tires (see example drawings)
 +
**off center electric anchor winch with wire
 +
**anchor to be stored at deck
 +
**winch to match regulations
 +
 +
*Name and colors
 +
**colorscheme
 +
***RAL3020 red
 +
***RAL9005 black
 +
***RAL7015 grey
 +
***RAL1018 yellow
 +
**name and buildnumber on pontoon (name P.A. 14?)
 +
 +
*Electric
 +
**generator set 15kVA on deck
 +
**shore connection
 +
 +
*Bilgesystem conform class
 +
 +
*Masts and lights
 +
**2x mast off center at each end
 +
**decklights for save working during night
 +
**nav lights + daylight signals for anchor and sailing conform BPR
 +
**2x decklight at upper container edge
 +
 +
== Drawing list ==
 +
*general arrangement
 +
*construction drawing
 +
*deck plan
 +
*water suction box
 +
*foundation plan fifi unit and generator
 +
*fuel tanks, piping and fill station
 +
*bilge pumps
 +
*masts and lighting
 +
*pushboat recess details (integrate in construction drawing?)
 +
*e-box / shore connection plan?
 +
 
  
 
[[Category: Projects]]
 
[[Category: Projects]]

Revision as of 12:58, 10 March 2015

  • Pontoon to be suitable for use in oil ports (regulations)


  • Construction
    • width to be extended by 2m at CL
    • deck load 2 ton/m2 minimum
    • aftship to have recess for receiving bow of pushboat
    • 2 coupling winches at aftdeck, minimum 500mm from boat side, about 10 ton per winch
    • hatches of sufficient size for each compartment with coaming 500mm height
  • Suction box
    • water intake box for fifi container suitable for flow rate 23m3/minute
    • suction box to have removable water inlet grills
    • idea is to have a box which can be lowered beneath the bottom with 2 worm winches
  • Railing and safety
    • at longitudinal sides a horizontal pipe Ø80-100 thickwalled, about 150mm above deck, stanchions every 1500mm, on top of it the railing, total height to be 1m
    • deck to have non skid strips
    • everything conform regulations
  • Container(s)
    • twistlocks and subframes for 2 container units of 5.50m, placed transverse on deck of pontoon
    • frames for containers and generator to be heavy and with flexible mounts, if necessary with reinforced construction below deck, to avoid pontoon becoming a resonance box.


  • Fuel tanks
    • total capacity 9 ton
    • 2 tanks H1000, W1500, length to be determined by Navyk
    • crossover
    • tanks to have a gauge glass
    • tanks to have a BOBS system (X-BOB)
    • fill station conform regulations


  • Mooring and anchoring
    • 2 bollards at every corner (I suggest we keep existing 6 bollards)
    • bollards to be non skid (by means of welding points)
    • bollards to be checked with regulations (reinforcement required below deck?)
    • fenders - at deck edge eyes for mounting car tires (see example drawings)
    • off center electric anchor winch with wire
    • anchor to be stored at deck
    • winch to match regulations
  • Name and colors
    • colorscheme
      • RAL3020 red
      • RAL9005 black
      • RAL7015 grey
      • RAL1018 yellow
    • name and buildnumber on pontoon (name P.A. 14?)
  • Electric
    • generator set 15kVA on deck
    • shore connection
  • Bilgesystem conform class
  • Masts and lights
    • 2x mast off center at each end
    • decklights for save working during night
    • nav lights + daylight signals for anchor and sailing conform BPR
    • 2x decklight at upper container edge

Drawing list

  • general arrangement
  • construction drawing
  • deck plan
  • water suction box
  • foundation plan fifi unit and generator
  • fuel tanks, piping and fill station
  • bilge pumps
  • masts and lighting
  • pushboat recess details (integrate in construction drawing?)
  • e-box / shore connection plan?
Retrieved from "http://navyki.navyk.ro/index.php?title=15012_pontoon_AMS&oldid=6251"