Difference between revisions of "CNC milling"
From NavykI
(→13012 Dykstra 62) |
(→13012 Dykstra 62) |
||
Line 1: | Line 1: | ||
− | == 13012 Dykstra 62 == | + | == [[13012 Dykstra 62]] == |
*File ''13012 SY62 nest_Bulkheads rev_E.dwg'' (Bulkheads, relative simple) | *File ''13012 SY62 nest_Bulkheads rev_E.dwg'' (Bulkheads, relative simple) | ||
*Milled by [http://marronjachtbouw.nl Marron] | *Milled by [http://marronjachtbouw.nl Marron] |
Revision as of 12:10, 8 October 2015
13012 Dykstra 62
- File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple)
- Milled by Marron
- Programmer > Mr. Ranga, with a background in CNC micro processing of metal
- Software > Maestro
- Router bit for outside contours > Ø8, 18.000 RPM, 6 meter/minute
- Arguments for small toolbit:
- less vacuum loss
- tool life is no issue for wood
- Arguments for small toolbit:
- remarks
- in theory lines/arcs should not be smaller then radius of router bit
- depending on software it will create problems or not
- as a test Mr. Ranga ran with Ø80 bit around contour with 9mm step in it without errors
- lines/arcs should also be larger then machine displacement (depending on machine displacement the milling contours are divided in steps, can be adjusted in machine parameters)