Difference between revisions of "CNC milling"

From NavykI
Jump to: navigation, search
(15038 BV 45ST Pure)
 
Line 20: Line 20:
 
== 15057 Primaat 12m ==
 
== 15057 Primaat 12m ==
 
*Milled by [http://www.issos.nl/ Issos]
 
*Milled by [http://www.issos.nl/ Issos]
 +
 +
 +
[[Category: Interior]]

Latest revision as of 13:42, 28 December 2017

13012 Dykstra 62[edit]

  • File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple)
  • Milled by Marron
  • Programmer > Mr. Ranga, with a background in CNC micro processing of metal
  • Software > Maestro
  • Router bit for outside contours > Ø8, 18.000 RPM, 6 meter/minute
    • Arguments for small toolbit:
      • less vacuum loss
      • tool life is no issue for wood
  • remarks
    • in theory lines/arcs should not be smaller then radius of router bit
    • depending on software it will create problems or not
    • as a test Mr. Ranga ran with Ø80 bit around contour with 9mm step in it without errors
    • lines/arcs should also be larger then machine displacement (depending on machine displacement the milling contours are divided in steps, can be adjusted in machine parameters)

15038 BV 45ST Pure[edit]

15057 Primaat 12m[edit]