Customizing AutoCad

From NavykI
Revision as of 14:56, 22 November 2011 by 192.168.11.21 (talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Navyk uses a number of customized toolbars for AutoCad.

Overview of Navyk tools

  • General
    • Mirror around origin
    • Measure from origin
    • Line from origin
  • ShipConstructor Structure
    • Create CON layer
    • Toggle CON layer ON/OFF
  • ShipConstructor Nest
    • Move 20mm up/down/left/right/diagonal
  • Navyk
    • Remove vertices below tolerance
    • 3D to 2D
    • Distance to origin
    • Mirror from origin
    • Line from origin
  • Curved (new toolbar for Acad 2012)
    • New (curved plate)
    • Edit Properties
    • Define Outer Toolpath
    • Extract Production Info


Installation

  1. Start AutoCad.
  2. Run the cuiload command.
  3. Unload any existing customization files except ACAD and SHIPCONSTRUCTOR.
  4. Browse to H:\Documents and Settings\AutoCad\AutoCad Customization\Navyk and select the file Navyk.cui.
  5. Load the file.
  6. Close the Load/unload customizations window.
  7. Right click on a Navyk toolbar to toggle the desired toolbars ON/OFF.
  8. To save your settings close AutoCad and open it again.
  • NOTE 1 - To make the CON layer tools functional copy the file acad.dbv from H:\Documents and Settings\AutoCad\AutoCad Customization to the desired AutoCad folder in Program Files.
  • NOTE 2 - If the *.cui file appears to be read only it might be because it is opened by other users.
Retrieved from "http://navyki.navyk.ro/index.php?title=Customizing_AutoCad&oldid=3040"