Aventura 43
From NavykI
Contents
General
- Lay out A is for the first boat, we have those drawings as a reference
- Lay out B is our boat (the second), it is a charter version with 8 berths
- Drawing Lay out B is a preliminary set up drawing only
- Not all space is used when it is inefficient or hard to reach for use
- Furniture is prefabricated outside the boat as much as possible
- Yard manager used to draw CNC building kits himself in 2D AutoCad
- Sheets are nested full, if possible move parts to another material in order to obtain this
Material
- Plywood birch 3050x1250mm
- 15mm + 2x HPL 0.75mm draw 17mm
- sole
- furniture
- seats
- 4mm + 1x HPL 0.75mm draw 5mm
- lining panels glued to steel construction
- 4mm + 2x HPL 0.75mm draw 6mm
- furniture backpanels
- 15mm + 2x HPL 0.75mm draw 17mm
Colours
- Colour for Aventura 43 CHARTER is Abet 661 Collectie Legni - Pino Chambery (0.9mm conform website)
- When no colour than 2x white backing
Sole insulation
- 4mm rubber above enginer room only
Part codes
- 5 horizontal layers:
- H1 sole
- H2 intermediary
- H3 seat
- H4 intermediary
- H5 ceiling
- 4 vertical segments:
- V1 on top of H1
- V2 on top of H2
- V3 on top of H3
- V4 on top of H4
- Compartments
- AK aft cabin (achterkajuit)
- VK fore cabin (voorkajuit)
- SH wheelhouse (stuurhuis)
- Furniture
- KN galley (keuken)
- SF settee (sofa)
- Partnumbers
- assigned clockwise
- Layer use in 2D Autocad
- DS = section (doorsnede)
- ST = steel (staal)
- 2 = layout 2
- FR = frame (spant)
- example: 2-BET-US-AK-WC-H1-01 = Layout 2, BETimmering-UitSlag-AchterKajuit-WC-Vloer H1, deel 01.
Ceilings
- 17mm base ply is mounted against all frames (see layer 1-BET-DS*)
- Aft deck is reinforced with 2 girders, here a '9mm birch plywood part is mounted first'?!?
Remarks Forepeak
Cabin 2 remarks
- 1 transverse bed 2000x800 direct on sole, see if you can use sole of layout A (VK-H1*)
- 1 longitudinal bed, max 1900 lenght? Forward engineroom bulkhead has large stiffeners, put first bulkhead in original position as layout A?
