15038 Bestevaer 45 ST Pure

From NavykI
Revision as of 14:49, 16 August 2015 by 31.160.12.62 (talk) (→‎Superstructure)

Jump to: navigation, search

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

Planning

  • Conform mail Willem Berends of July 16
  • WK 30 Navyk to implement all comments and changes.
  • WK 30 End of the week Navyk will send the draft files for review.
  • WK 32 Bamboo wood will be delivered to KMY for surface preparations.
  • WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
  • WK 34 All wood material (exl. floor) will be deliverer at CNC works.
  • WK 34 End of this week Navyk will deliver the complete files to KMY.
  • WK 35 CNC will cut all materials en deliver to the KMY.

TO DO

Solid model

General

  • Toilet outlet > route (?)
  • Lighting > add cutouts for spots (3d models are in inbox\70 interior\appliances

Sole

FINAL

Forecabin

FINAL

Salon

FINAL

Galley

FINAL except for drawer panels which must be locally recessed to accommodate drawer side hardware (Liviu?)

Bathroom

FINAL except for wooden rims upper lockers (to be added)

Aft ship

FINAL

Superstructure

  • Base ceiling
    • split for sheet size
    • Moulding deck/hull
      • narrow lower width
      • remove round corners in FC
  • galley pillar > update diameter and position
  • check interference with yard entrance detailing
  • update Skyscreens
  • ceiling spots > add cutouts

Sole structure

  • finalize (after approval of KMY)

Other files

  • labels > create excel sheet with codes for each part
  • additional files:
    • Marlan templates
    • Metal parts (?):
      • handrails
        • galley
        • SB > to model
        • PS > to model

Overlength

  • 10mm at bulkheads which connect to superstructure
  • 5mm at inside contour of base ceiling hull (where it connects to superstructure lining)

Navyk remarks for KMY

General

  • push button > knob can be rotated 90° or 180°?
  • heating
    • outlets > HIP?
    • accesoires?

INFO

General

  • driver-drill
    • total length including bit > 210mm
    • distance shaft center to top of housing > 36mm

hatches and portlights

  • Deckhatches:
    • Lewmar Size 60 low profile: 39960030
    • Lewmar Size 30 low profile: 39930030
  • Portligths in superstructure:
  • Portlights in cockpit:

hardware

  • finish > stainless steel

lining

  • V-grooves, every 100mm, parallel to deckline/sheer

ceilings

entrance doors

  • door width net standard > 560mm
  • door width net minimum > 500mm
  • gap under door > ?
  • core > plywood ocoume 18mm
  • cover panels > plywood bamboo 7mm
  • hinges?
  • mortise lock?
  • handles?
  • door plates/shields?
  • height doorhandles?
  • door catch?
  • ajar hook?

lockers

  • shelves > mounted with shelf supports (Hettich)
  • FYI > solid corner profiles in furniture plintes will be painted white
  • hinges > Hettich Intermat Soft....
  • drawer runners > Hettich Quadro 30
  • closing device > Kroon 372369
  • shelf supports

seats

  • seat cushion thickness 100mm
  • back vertical
  • seat panel 340mm above sole

berths

  • matrass thickness 100mm
  • bed slats 40 mm from Spacerflex

Sole

  • base > 18mm ocoume, varnished all around
  • finish > chest nut
  • margin boards > width 70mm
  • hatch locking device > see material list

Fore Cabin

Salon

Galley

Bathroom

Aft cabins

  • entrance door > rotates inside

Deck house

Superstructure

  • Skyscreen
    • type Roller Surface 2 With Seal
    • orientation is transverse sliding

Modeling refereneces

Tolerance

  • distance to frame flanges 20

Lining

  • deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

  • superstructure
    • offset 58 from inside shell
    • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
    • interference with stringers <2, to be solved on board

Sheet estimation

transverse grain

  • 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
  • 6mm single bamboo - 1 sheet - bench fronts DH

Milling

  • Subcontracted to CNC werk
  • Tools
    • router bit Ø10 and Ø20
    • drill Ø3 (smallest)
  • Layers
    • for each tool
    • for each router bits per contour (outside / inside / inset)
  • Contours
    • closed polylines
    • no curves
    • no splines
  • Drilling holes
    • layer per diameter per depth
    • mark with 'dot' (AutoCAD)
  • Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet)
  • Labels
    • file format excel
    • each info line in a column
    • at least showing part ID and sheet ID (so 2 columns)
    • if possible show material ID (3 columns)

Aluminum

  • mast bulkhead > bolted? requires hatch in bed
  • mast bulkhead > cutout entrance door + heater hose
  • aft bulkhead > cutout for heater hose
  • galley > pillar
  • bolt connection > create detail

People

  • Eeuwe Kooi - director/owner (not directly involved)
  • Willem Berends - chain manger (responsible for contract)
  • Willem-Jan van der Vegt - engineer (our contactperson)
  • Haaie Andringa - foreman carpentry

Exchange work

  • KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
  • integration of heater ducting is not in contract
  • info is not delivered on Monday, June 15 but came partially on June 16 and 17

As discussed

July 1, 2015

  • furniture doors - 17mm is OK
  • entrance hatch recess box - PUR insulated, put plywood panel in front
  • stair steps solid wood
  • cockpit sole - covered with cork 9mm
  • lining - leather panels are canceled
  • porthole boxes - yard makes tube, out of our delivery

June 16, 2015

  • black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015

  • tolerances
    • vertical:
      • sole to supporting structure - 0mm
      • ceiling to structure - 0mm
    • horizontal
      • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
  • insulation type is PUR
  • grain orientation will be vertical
  • sole supports are alu tube 50x30x?
  • cabinet interiors to be white
  • KMY workshop facilities:
    • no veneer press
    • edge band machine for straight edges
    • lamello machine
    • round router bits R6, R8, R10, R12
  • Navyk will route the ducting for airheating through the interior
  • Navyk is free to use their own material naming
  • Navyk will give a price offer for the aluminium sole supports

Structure model - modifications!

  • Forepeak bulkhead - stiffeners will be on aft side (cabin side)
  • Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
  • Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
  • sole structure - to be determined, Navyk will make a price offer for this
Retrieved from "http://navyki.navyk.ro/index.php?title=15038_Bestevaer_45_ST_Pure&oldid=6525"