10001 MS Albatros

From NavykI
Revision as of 19:16, 5 September 2011 by 192.168.11.15 (talk)

Jump to: navigation, search

General

Contacts

  • client is Pieter Smit (contractant)

Classification

  • RINA

Scope

  • hydrostatics
  • stability

Time Schedule

To do

  • ON update weight calculation/hydrostatics for situation at launching
  • drawings:
    • update masts and rigging for funnel mast
    • boarding ladder
    • pasarelle
    • removable table on windlass gear casing
    • design exterior furniture (chairs foredeck)
    • provisions for lowering mast with their own hoists
    • bilge foreship - frame for storage boxes
    • sole - add hatches inside WH console
    • ventilation - technical space - combine with cowl at bench?
    • miscelaneous details - update funnel mast for additional antenna's and light
    • bench wheelhouse front - center hatch: larger gas springs (200N)?
  • spreader lights - Aqua Signal Lubeck
  • furniture drawings - ceder veneer
  • interior door stoppers
  • material orders:
    • rubber stairs profile?
    • bench hatch gassprings

Hotwork or steel cutting to be done

  • ER air intakes - drains
  • funnel - L-profile firedamper + support morse cable
  • aftdeck - shower
  • flagpole - support
  • filling stations - locking device
  • SOS locker - locking device
  • screwed on
    • lifebuoys
    • doorholders (order for salon)

Sending furniture drawings to Albatros team

  • remove WIP from the file name
  • make the drawing 'read only'
  • update the Albatros drawing list (Google document)
  • put PDF on FTP (when it concerns an update, delete the old PDF from FTP)
  • send PDF to Ionut Melescanu and CC to Steven - subject Albatros - furniture drawing new or Albatros - furniture drawing update
  • if the drawing has electrical connections / appliances than send also the DWG file to Ionut Melescanu (contactperson RETEC)
  • print drawing on A4 colour and put in Albatros file

Hydrostatics

launching 8 july 2011

  • 62 tons - weight in crane
  • Waterline measurements:
    • Fore-> 340mm under the XVI draft mark
    • Aft -> 360mm under the XX draft mark

Outfitting

Passarelle

  • 24V actuator
  • length
    • base about 2000
    • extension about 1500
  • for examples see Besenzoni

Interior