Aventura 34 OC

THIS BOAT WILL BE RENAMED AVENTURA 34 OC

General

sales - Aventura Yachts contactperson Bert Meijer
construction - Bronsveen contactperson Jan Aslander
construction (subcontractor Bronsveen) - CMS schepen contactperson is Delmer Los
interior / paintwork - Jurjen Mulder Jacht- en Scheepsbetimmering contactperson Jurjen Mulder
initial client - boat rental Schultz

swimplatform - extend deck aft 400mm, add second deck at an offset of 80mm down (net distance between decks 80mm)
bottomstringer foreship - make intercoastal DONE (VC)
ropefender - make strips 50mm wide over nose, from F17 forward, 1 strip at knuckle hull/bulwark, 1 strip at offset 80mm down

gaslocker - move from sidedeck to PS cockpitbench, directly aft of superstructure bulkhead, no hatch detailing (yard will make alu hatch)
cockpit benches - add 2 short hatches in benches against transom, height as hatches in side benches

superstructure aft bulkhead - move aft 150mm (modify windows?), remove vertical 'roof extension' aft of windows, we can decide if roof extension over cockpit will remain or not
deck hatch forepeak - make cutout in roof 4mm bigger to accommodate vertical FB 30x4 (hatch base about 10-15mm above roof) DONE (VC) BUT it must be changed again: deckhatch will be mounted on top of L50x50x5 profiles with flanges pointing inward
deck hatch salon - mark HIP for sliding hatch Webasto serie 60 (HIP should be about 1100x1800)

mark lower swimplatform deck on transom
cut FB50x5 from plate?
cockpit hatches - cut at correct size
Jurjen Mulder: salon entrance cutout: add detail on construction plan (bhd stiffeners are in different position per boat)
Jurjen Mulder: shower is enlarged aftward
Jurjen Mulder: bottom frames iwo toilet/shower - reduce height?

Jurjen Mulder: remove lg's in way of superstructure front, they are very inconvenient for the interior - SH: Will weaken the structure
Jurjen Mulder: frames foreship - raise to sole level (sole salon minus 600mm) - 27-01-2012 contact with Jan Aslander, he says no need for this.