Issues SC2008

General

• How to display the SC ribbons?
  • Type "ribbon" to display the ribbons
  • If you don't see the ribbons that you need you have to change the workspace (click on the gear button on the lower right of the screen and select from there what you need).

Manager

• Correct settings for text style, height, etc. (they disappear after exploding nests?! DXF?!)

Hull

• minimum import tolerance is 0.1mm, how to increase?
  • 0.1 is the minimum value for SC.
• trim lines in hull gives big differences because of NURBS lines are transformed into polylines
  • Trim the surfaces with Rhino imported curves (exploded), not with nurbs.

Structure

• layer management (important for bound approval)
  • The AutoCad setting LAYEREVALCTL must be 0. Disables the evaluation and notification of new layers.
  • For more details search Acad Help for "Use New Layer Notification"
• Unreconciled layers cannot be plotted in AutoCad2006.
  • Workaround: open and save the drawing in Rhino.
• Export - exports all layers, how to export only the solid layers?

Nest

• Paint is not correct updated in the BOM
  • Solved
• Nest template - text style
  • Solved
• Nest - layer use
  • all on STOCK now
• Parts cannot be exploded outside the project (for export to NC-Pyros)
  • Workaround: Export each nest as DXF