New project - SC 2008

SC2008 project creation

• 1. In partition P create a folder with the project name.
• 2. SC2008/ Project/New project
• 3. Fill up the window "New ShipConstructor Project"
• 4. Check : View from Aft
• 5. Choose the SC Template Project file.
• 6. User name: SH, PASS: no pass.
• 6. Click OK (data base will be created)
• 7. Click new unit and name it.
• 8. Navigator/Template/ Structure template and Nest Template: set up the following:
  • Units:mm
  • Coords: 2
  • KP text style (arrial narrow /regular/0)
  • Dim style KP-25
  • lts 50
  • leader settings: 2 points, underline text.

If are any problems in longing in in on the new project created due to the user permission this can be solved going in SC20008/ administrator/manage users.

After project creation the setting up of the project goes on following:

• Scon/Manager/GENERAL/Project settings/General+Reports+Structure
• Scon/Manager/GENERAL/User permission
• Scon/Manager/GENERAL/Materials
• Scon/Manager/GENERAL/Manufacturers
• Scon/Manager/GENERAL/Finishes
• Scon/Manager/GENERAL/Text styles - text style name in manager must have the same name like in acad; ex: KP.
• Scon/Manager/GENERAL/Naming conventions
• Scon/Manager/GENERAL/Production output/ Label styles,Dimension styles, BOM
• Scon/Manager/STRUCTURE/Stock catalog - where you set up the plate stocks and profiles used in the project
• Scon/Manager/STRUCTURE/Piecemark styles. The profile piecemark is placed on profile and is also appearing rotated next to the plate edge for visibility.
• Scon/Manager/STRUCTURE/Plates / Mark line styles (datum lines)+ orientation icon+NC machines.

The rest of the menus and sub menus from Manager are updated during working in the project function of every project requirements regarding endcuts, standard parts, etc.