Material Properties
From NavykI
Revision as of 10:56, 11 January 2010 by 192.168.11.14 (talk)
Steel
- Density 7800 kg/m3
Stainless steel
| Property | Units | Typical | Type 316 | Type 316L |
| Ultimate Tensile Strength | [N/mm^2] | 586 | 517.1 min | 482.6 min |
| 0.2% Offset Yield Strength | [N/mm^2] | 303.37 | 206.84 min | 172.37 min |
| Elongation in 2 inches | [%] | 56 | 40 min | 40 min |
| Reduction in Area | [%] | 69 | — | — |
| Hardness, Rockwell | [B] | 81 | 95 max | 95 max |
| Density | [Kg/m^3] | 7 888.77 | — | — |
| Modulus of Elasticity | [psi] | 29 x 10^6 | — | — |
- Quality 304 (A2) and 316/316L (A4) are suitable for use on board.
Aluminum
- Density 2700 kg/m3
- 5083-H111 can be bended without restrictions
- 5083-H321 limited bending (no hard bigger than 45 degrees)
Diesel
- Density 850 kg/m3
Gasoline
- Density 720 kg/m3
Carbon steel diamond plate
| Th | Diamond plate | Normal plate | Diamond % heavier |
| mm | Kg/m^2 | Kg/m^2 | |
| 3 | 26.17 | 23.40 | 10.6% |
| 4 | 34.91 | 31.20 | 10.6% |
| 4.5 | 36.91 | 35.10 | 4.9% |
| 5 | 43.60 | 39.00 | 10.5% |
| 6 | 48.68 | 46.80 | 3.9% |
| 8 | 64.40 | 62.40 | 3.1% |
| 10 | 80.12 | 78.00 | 2.6% |
| 12.5 | 99.70 | 97.50 | 2.2% |
- Quality 304 (A2) and 316/316L (A4) are suitable for use on board.
