Spatio Navis 40

General

• salesprice 215.000 € ex VAT
• to compete with:
  • Jetten 37 AC
  • Aventura 38 AC
• initial client - boat rental Schulz, renting a lot to group of man (biliart clubs, etc.)

Classification

• CE-C

Drawing list

• Note:
  • Below list is not complete
  • Drawings can be combined if suitable
• CE?

10 Design and styling

• 10-100 general arrangement
• 10-910 general data
  • net weight construction
  • net weight interior
  • total weight
  • COG
• 3D presentation models?
• renderings?

20 Naval Architecture

• 20-100 linesplan
• 20-200 tank arrangement

30 Propulsion

• 30-100 Propulsion arrangement
• rudder configuration too?

40 Construction

• 40-100 general construction plan
• 40-110 detail construction plan
• 40-120 plate nests steel
• 40-121 plate nests stainless steel
• 40-130 shell penetrations
• 40-140 bending and forming
• 40-910 material estimation steel
• 40-920 key data
  • net weight
  • brut weight
  • loss %
  • COG
  • cutting length

50 Outfitting

• 50-110 deck plan
• 50-111 fender details?
• 50-120 portholes and hatches
• 50-121 windows
• 50-122 entrance door and sliding hatch
• 50-123 windscreen
• 50-150 ventilation
• 50-160 stainless steel (incl. material estimation or on separate document?)
• 50-170 steering arrangement
• 50-180 windlass arrangement
• 50-190 mast
• 50-200 bench aftdeck
• 50-210 sprayhood and bimini
• 50-220 steering console?

60 Systems

• 60-100 systems????
• 60-110 diagrams

70 Interior

• 70-100 set up interior
• 70-105 general detail plan
• 70-110 sole plan
• 70-120 lining plan
• 70-121 base wood plan
• 70-130 ceiling plan
• 70-140 lighting plan
• 70-150 profile list
• 70-160 cabin doors
• 70-161 salon table
• 70-162 cabin stairs
• 70-163 cooling box
• 70-170 upholstery
• 70-800 nests
• 70-810 furniture expansions
• 70-820 furniture assemblies
• 70-910 key data
  • net weight
  • brut weight
  • loss %
  • COG
  • cutting length
• 70-920 material estimation plywood
• 70-930 hardware list
• 70-940 hardware catalogue
• 70-950 assembly names

10 Design

• sales strategy is to offer as much berths as possible for the lowest price so the boat will be very interesting for the rental market
• only developable surfaces
• simple and cheap - the less components the cheaper to build
• furniture to be split in units which can be prefabricated outside the boat (and outside the premises)
• windows
  • sliding window in salon side
  • supplier - cheapest(RAFA?)
• portholes
  • supplier - Gebo
  • PS and SB can be non symmetrical
  • hull - glue plexiglass/lexan?
  • hull - combine with ER air intake?
• deck hatches
  • supplier - Gebo
  • make sure you can reach the hatch for closing/opening
  • entrance hatch - GRP Centerboard standard
• doors
  • transom door - standard Gebo door?
• ventilation
  • very important and permanent
  • all spaces
• sidedeck steps - not IN bathrooms but well before them (possible use for breathers)
• transom stairs
• width 500-550 (older people)
• last step ending under 45 degrees with CL
• transom gas locker PS - for 2x 5kg gas bottle
• swimplatform - length minimum 800mm
• swimplatform - lower part at least 200mm above DWL (to avoid slamming waves against swimplatform
• transom corners - well rounded
• shaping:
  • no forming plates
  • no bending plates
  • only 'radiused' plates
• transom cheeks with knuckles?
• sidedecks - 450mm wide
• superstructure - max width 3100-3150
• bench aftdeck - GRP
• railing cloths - steel (Schulz)
• rope fender around hull
• rubber fender around swimplatform

50 outfitting

• aftdeck
  • fridge
  • sink + tap
  • helmsman seat see Todd USA (fridge integrated?)

70 interior

• aftcabin
  • bed under 45 degrees against transom
  • option for double cabin layout (can be non symmetric)
  • double bed convertible into 2 single beds (sliding/hinging system, seen on Greenline 33)

20 Naval Architecture

Transom rounding

• well rounded to avoid damage during leaving quai side
• keep step of 150mm next to stairs so you can step on the quai side
• hull transom can stop before rounding (shortening hull)

Propulsion

• suggestion Schulz: Craftsman CM4.80 - price for 5 pcs €7700
• Schulz: Deutz 1013M engines are very reliable
• Schulz: replacing 10 propellors per year, sometimes including shaft (under water rocks/stones)

Tanks

• capacity:
  • 500l FW (because of 2 showers)
  • 500l fuel
  • 500l WW (for example in keel, to not create heel/trim)
• tank status to not influence trim/heel
• WW tank above FW tank, transverse in front of engine?
• all custom made PP tanks

40 Construction

• as cheap as possible (simple, light)
• yard budget 600 manhours
• side stiffening - longitudinal FB CNC
• transverse bottom stiffening - CNC frames ending against T-stringers
• roof beams - CNC (profile is hard to make them all exact the same)
• sole on LG rectangular tubes 60x40 (check size), used for cables too (thrusters, windlass)
• salon will be 'removable' in order to bring in the prefabbed interior parts, coupling detail as CC40

50 Outfitting

• fender around swimplatform (well rounded corners)
• fender around transom cheeks (renters succeed to damage even this part of the boat with manouvring)
• windlass with chainpipe through bow
• navigation lights
  • boardlights
  • anchorlight
  • steamlight
  • sternlight
• mast
• stainless steel
  • bollards
  • anchor protection plate at bow
  • fender fairings
  • handrail
  • railing
  • mast?

60 Systems

• exhaust - shell penetration in engine room, via st.st. rectangular tube 100x60 to transom (check back pressure), exit in bottom of tube
• heating
  • Maritime booster
  • cabins - radiators
  • wet cabins - towel radiator
• hot water
  • boiler on engine (WHY?!?!?! use a combi heater?!??!)
• toilet
  • Jabsco Lite Flush?
• only 1 showerdrain box in foreship, from aftship will come via pipe into this box

70 Interior

• make several color proposals (renderings) based upon HPL (incl. non-wood)
• wet cabins
  • HPL, not spraypainted
  • sole - cheaper Corian alternative
  • prefab unit, including systems?
• salon - large flatscreen TV on lift
• sole - HPL teak and holly
• appliances
  • NO hood above stofe

80 Paint and insulation

• insulation
  • hull - spray PU
  • decks / superstructure - Kingspan Thermaroof TR26