Aventura 34 OC

PREVIOUSLY NAMED AVENTURA 32 OC

General

Contacts

• sales - Aventura Yachts contactperson Bert Meijer
• construction - Bronsveen contactperson Jan Aslander
• construction (subcontractor Bronsveen) - CMS schepen contactperson is Delmer Los
• interior / paintwork - Jurjen Mulder Jacht- en Scheepsbetimmering contactperson Jurjen Mulder
• initial client - boat rental Schultz

Drawing list

• 11002-50-110-B detail construction plan (07-11-2011)
• 11002-50-200-A window plan (07-11-2011)

Issues

• Jan van der Weide: knuckle in sideview bow is ugly and not necessary

11002 BN01

• done

11015 BN02

• done

11023 BN03 done

Hull

• swimplatform - extend deck aft 400mm, add second deck at an offset of 80mm down (net distance between decks 80mm)
• bottomstringer foreship - make intercoastal DONE (VC)
• ropefender - make strips 50mm wide over nose, from F17 forward, 1 strip at knuckle hull/bulwark, 1 strip at offset 80mm down

Deck

• gaslocker - move from sidedeck to PS cockpitbench, directly aft of superstructure bulkhead, no hatch detailing (yard will make alu hatch)
• cockpit benches - add 2 short hatches in benches against transom, height as hatches in side benches

Superstructure

• superstructure aft bulkhead - move aft 150mm (modify windows?), remove vertical 'roof extension' aft of windows, we can decide if roof extension over cockpit will remain or not
• deck hatch forepeak - make cutout in roof 4mm bigger to accommodate vertical FB 30x4 (hatch base about 10-15mm above roof) DONE (VC) BUT it must be changed again: deckhatch will be mounted on top of L50x50x5 profiles with flanges pointing inward
• deck hatch salon - mark HIP for sliding hatch Webasto serie 60 (HIP should be about 1100x1800)

Miscelaneous

• engine - move aft
• nest - add remark for cutter - 'platen op holle zijde markeren'

12005 BN04

• deck hatch salon - removed marking (for price offer Blom 23-01-2013)

110XX BNX

• mark lower swimplatform deck on transom
• cut FB50x5 from plate?
• cockpit hatches - cut at correct size
• Jurjen Mulder: salon entrance cutout: add detail on construction plan (bhd stiffeners are in different position per boat)
• Jurjen Mulder: shower is enlarged aftward
• Jurjen Mulder: bottom frames iwo toilet/shower - reduce height?

ask yard

• Jurjen Mulder: remove lg's in way of superstructure front, they are very inconvenient for the interior - SH: Will weaken the structure
• Jurjen Mulder: frames foreship - raise to sole level (sole salon minus 600mm) - 27-01-2012 contact with Jan Aslander, he says no need for this.