14004 Floatel

General

yard budget for developing and building 1st hull €35.000 (Floating 44 was €20.000, Comforship was €40.000 (done by Michiel van Vossen))
Material - aluminum
CE Category C (required by marina's)
floating hotel room, will never leave it's berth after mooring
Hull - as cheap as possbile to produce (combination of smart engineering, material reduction and labor reduction)
Floating 44 (project 13006):
- displacement 14 tons
- floating at DWL
- trim aft 40mm
- transverse cross stiffeners removed
- see dwg P:\Offers\14004 Houseboat\Final draw

Peter will inform if boat needs to be sailing or not for CE approval
BOA 4980mm for roadtransport (including wooden sideplanking)
sceptic tank Afmitech Bever Combi Compact
- contact person Jan Boede de Jong
- tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible
- bench and bathing platform to be removable for this purpose
- hull fixtures by Navyk
Dual Docker removable mounting plates by Navyk
removable cleats by Navyk (see pictures)
hull construction:
- bended sheets 3x2m
- on top 21mm wide flanges
- bottom slightly rounded for additional stifness
- all tubes rectangular 120x60
- cut out in tubes for draining rainwater from deck
- NO double transom (Floating 44)
- technical space
  - in SB hull
  - access hatch CO 500x500
  - space position by Niels
- pipe through hull in way of whirlpool for drainpipe?
- bridge connection
- top of wooden planking in line with interior sole
wooden planking
- Lariks 28mm
- beams H60mm
bathing area in front of bench
- alu grills on alu structure
- grills tbd by Linskens
house
- roof of sandwich panel (Kingspan Unidek):
  - 10mm OSB
  - 160mm ESP / wooden beams at 450 COC
  - 10mm OSB
- side walls
- load for strength calculation to be determined by Linskens
insulated and heated drain hose for whirlpool Ø80mm