14004 Floatel

General

• yard budget for developing and building 1st hull €35.000 (Floating 44 was €20.000, Comforship was €40.000 (done by Michiel van Vossen))
• Material - aluminum
• CE Category C (required by marina's)
• floating hotel room, will never leave it's berth after mooring
• Hull - as cheap as possbile to produce (combination of smart engineering, material reduction and labor reduction)
• Floating 44 (project 13006):
  • displacement 14 tons
  • floating at DWL
  • trim aft 40mm
  • transverse cross stiffeners removed
  • see dwg P:\Offers\14004 Houseboat\Final draw

Scope

• no stability?
• only hydrostatics
• weight only interpolation with Floating 44
• bench is alu
• boat is non sailing unless CE insists (?!)

Additional

• 7 superstructure frames (5 onder, 2 boven)
• hatch hull
• NO railing
• NO stairs interior
• NO stairs exterior
• NO 'kraaiennest'
• bridge connection
• calculate influence of filled whirlpool on heel

Meeting notes

• Peter will inform if boat needs to be sailing or not for CE approval
• BOA 4980mm for roadtransport (including wooden sideplanking)
• sceptic tank Afmitech Bever Combi Compact
  • contact person Jan Boede de Jong
  • tank W2200 (possibly W2000) to be fitted between hulls, as far aft as possible
  • bench and bathing platform to be removable for this purpose
  • hull fixtures by Navyk
• insulated and heated drain hose for whirlpool Ø80mm
• Dual Docker removable mounting plates by Navyk
• removable cleats by Navyk (see pictures)
• wooden planking
  • Lariks 28mm
  • beams H60mm
• bathing area in front of bench
  • alu grills on alu structure
  • grills tbd by Linskens

hull construction

• bended sheets 3x2m
• on top 21mm wide flanges
• bottom slightly rounded for additional stifness (10mm)
• bow
  • rectangular in planview
  • sloped in sideview
• all tubes rectangular 120x60
• cut out in tubes for draining rainwater from deck
• 70mm distance between platform beams and deck
• NO double transom (Floating 44)
• technical space
  • in SB hull
  • access hatch CO 500x500
  • space position by Niels
• pipe through hull in way of whirlpool for drainpipe?
• bridge connection
• top of wooden planking in line with interior sole

house

• roof of sandwich panel (Kingspan Unidek):
  • 10mm OSB
  • 160mm ESP / wooden beams at 450 COC
  • 10mm OSB
• side walls
• load for strength calculation to be determined by Linskens