15038 Bestevaer 45 ST Pure

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

TO DO

General

• • hatch coamings
  • port hole boxes superstructure
  • leather ceilings
  • lining > V-grooves, every 100mm, parallel to deckline/sheer
  • access bolt connection for mounting superstructure
  • drill holes and notches for assembly
  • heating > add bulkhead penetrations for hose and grills

Fore Cabin

• hatches in bed bottom
• battery box

Salon

• • pillar mast bulkhead > connected with FB 8mm, split mast bulkhead
  • table
  • chain plate reinforcement > mask
  • lower hinge in forward upper cabinet will be solved by KMY

Galley

• pillar
• re-arrange front drawings to avoid collision with table
• sink > new model?
• fridge > ventilation by holes in locker bottom next to plinth and holes in upper part of PS counter side

Bathroom

• sole detail
• yard will inform if glass doors in bathroom will be applied or not
• material > panels can be normal HPL as rest of boat, the special quality W400-VV is canceled.

Aft cabins

• PS > bulkhead cutout, profiles, raise horizontal profile in line with sole deckhouse
• bed bottoms > hatches for access storage space under, support?
• lining > align knuckles with V-grooves

Deck house

• 'pillar boxes' to be moved outboard 10mm
• all panels to be white, except for bench fronts, 'pillar boxes' besides entrance and top of guest cabin SB
• bench fronts and top of guest cabin to be covered with 6mm bamboo as for entrance doors
• add solid profiles around top of guest cabin.

Sheet estimation

transverse grain

• 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
• 6mm single bamboo - 1 sheet - bench fronts DH

Questions

• General
  • corners of plinths above lockers > painted solid?
  • bulkhead corners deckhouse?
  • lining
    • grooves horizontal or parallel to deck?
    • distance 100mm?

• Fore cabin
  • locker shelf heights adjustable?
  • net door width is 500

• Saloon
  • details of mast support
  • lower hinge in FWD cabinet
  • back and side cushions will extend beyond top and front?
  • table?

• Galley
  • fridge ventilation top?
  • pillar position?
  • tap cannot be behind sink but will be next to it.

• Bathroom
  • wash basin far too big
  • furniture material VV too?
  • Glass doors?

• Deckhouse
  • top is white because we don't have 12mm bamboo
  • bench front is large area with only small piece of bamboo visible

• Guest cabin
  • storage under bed?
  • door rotates inside or outside?

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry

Exchange work

• KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
• integration of heater ducting is not in contract
• info is not delivered on Monday, June 15 but came partially on June 16 and 17

As discussed

July 1, 2015

• furniture doors - 17mm is OK
• entrance hatch recess box - PUR insulated, put plywood panel in front
• stair steps solid wood
• cockpit sole - covered with cork 9mm
• lining - leather panels are canceled
• porthole boxes - yard makes tube, out of our delivery

June 16, 2015

• black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015

• tolerances
  • vertical:
    • sole to supporting structure - 0mm
    • ceiling to structure - 0mm
  • horizontal
    • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
• insulation type is PUR
• grain orientation will be vertical
• sole supports are alu tube 50x30x?
• cabinet interiors to be white
• KMY workshop facilities:
  • no veneer press
  • edge band machine for straight edges
  • lamello machine
  • round router bits R6, R8, R10, R12
• Navyk will route the ducting for airheating through the interior
• Navyk is free to use their own material naming
• Navyk will give a price offer for the aluminium sole supports

Structure model - modifications!

• Forepeak bulkhead - stiffeners will be on aft side (cabin side)
• Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
• Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
• sole structure - to be determined, Navyk will make a price offer for this