CNC milling
From NavykI
Revision as of 16:20, 7 October 2015 by 31.160.12.62 (talk) (Created page with " == 13012 Dykstra 62 == *File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple) *Milled by [http://marronjachtbouw.nl Marron] *Programmer > Mr. Ranga, with a ba...")
13012 Dykstra 62
- File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple)
- Milled by Marron
- Programmer > Mr. Ranga, with a background in CNC micro processing of metal
- Software > Maestro
- Router bit for outside contours > Ø8, 18.000 RPM, 6 meter/minute
- less vacuum loss
- tool life is no issue for wood
- remarks
- in theory lines/arcs should not be smaller then radius of router bit
- depending on software it will give issues or not
- as test Mr. Ranga ran with 80mm bit around contour with 9mm step in it without errors
- lines/arcs should also be larger then machine displacement (depending on machine displacement the milling contours are divided in steps)