CNC remarks KMY

Cutout radi, even for rectangular cutouts, are not tangent with straight edge.

Navyk

• material estimation / BOM
  • must inidicate clearly the quality of the panel 'sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)'
• groups > avoid large groups containing large numbers of parts (split aftship in PS / CL / SB)
• lamello's > mill in order to avoid a lot of measuring and distribute panel thickness issues
• grain > should continue for cabinet doors / drawer fronts, mill with 3mm (check with milling company)
• technical hatches
  • replace half overlap with ring (although conform JanW the half overlap works out perfect for SN40)
• base panels portholes and deck hatches > 4mm cork applied
• line entities and arc entities shorter then 1mm > remove from milling contour (conform mail Dec-03 2015)

KMY

• use larger panels 3050x1550? no split parts, less waste?

Material supplier

• sanded panels with dimension tolerances as per DIN 315 (thickness tolerance within one panel 0.6mm)

Milling

• delivery
  • deliver parts sorted per group (not done for Pure)
  • deliver small parts seperated from panel (not yard to remove the small parts out of the panel)
• issues
  • drill holes > not drilled for Pure (overlooked, only the crosshairs on no process layer were noticed and removed)