CNC milling

From NavykI
Revision as of 14:42, 28 December 2017 by Navykisysop (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

13012 Dykstra 62

  • File 13012 SY62 nest_Bulkheads rev_E.dwg (Bulkheads, relative simple)
  • Milled by Marron
  • Programmer > Mr. Ranga, with a background in CNC micro processing of metal
  • Software > Maestro
  • Router bit for outside contours > Ø8, 18.000 RPM, 6 meter/minute
    • Arguments for small toolbit:
      • less vacuum loss
      • tool life is no issue for wood
  • remarks
    • in theory lines/arcs should not be smaller then radius of router bit
    • depending on software it will create problems or not
    • as a test Mr. Ranga ran with Ø80 bit around contour with 9mm step in it without errors
    • lines/arcs should also be larger then machine displacement (depending on machine displacement the milling contours are divided in steps, can be adjusted in machine parameters)

15038 BV 45ST Pure

15057 Primaat 12m

Retrieved from "http://navyki.navyk.ro/index.php?title=CNC_milling&oldid=6912"